d Clean the corona wire inside the drum unit by gently sliding the green tab back and forth several times.
1
Note
Be sure to return the tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe.
e Put the drum unit and toner cartridge assembly back into the machine.
f Close the front cover of the machine.
Routine maintenance
Cleaning the drum unit
If your printout has dots at 94 mm intervals, follow the steps below to solve the problem.
a Make sure that the machine is in the Ready mode. Press Menu, 6, 6, then press Start to print the drum dot check sheet.
66.Drum Dot Print
Printing
b Leave the machine turned on for 10 minutes for the internal fan to cool the internal parts of the machine that are extremely hot.
c After the machine has cooled down, turn off the machine.
d Press the front cover release button and A then open the front cover.
55