3 Loading documents

How to load documents

You can copy and scan from the ADF (automatic document feeder) or the scanner glass.

Using the automatic document feeder (ADF)

The ADF can hold up to 35 pages (for DCP-8110DN) or up to 50 pages (for DCP-8150DN and DCP-8155DN) and feeds each sheet individually. Use standard

20 lb (80 g/m2) paper and always fan the pages before putting them in the ADF.

Document Sizes Supported

Length:

5.8 to 14 in. (147.3 to 355.6 mm)

Width:

5.8 to 8.5 in. (147.3 to 215.9 mm)

Weight:

17 to 24 lb (64 to 90 g/m2)

How to load documents

Important

•DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

•DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper- clipped, pasted or taped.

•DO NOT use cardboard, newspaper or fabric.

•To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Note

•To scan documents that are not suitable for the ADF, see Using the scanner glass uu page 24.

• It is easier to use the ADF if you are

3

loading a multiple page document.

•Make sure documents with correction fluid or written with ink are completely dry.

a Unfold the ADF document support (1). Lift up and unfold the ADF document output support flap (2).

1 2

b Fan the pages well.

c Stagger the pages of your document face up top edge first, in the ADF until the LCD display message changes and you feel the top page touch the feed rollers.

23