Brother DCP-8110DN manual 66

Error Message	Cause	Action
Out of Memory	The machine’s memory is full.	Copy operation in process
		Do one of the following:
		 Press Start to copy the scanned pages.
		 Press Stop/Exit and wait until the other
		operations in progress finish, and then try
		again.
		 Add optional memory.
		(See Advanced User's Guide: Memory
		board.)
		Print operation in process
		Do one of the following:
		 Reduce the print resolution.
		(See Software User's Guide: Printing (for
		Windows®) or Printing and Faxing (for
		Macintosh).)
		 Add optional memory.
		(See Advanced User's Guide: Memory
		board.)
Out of Memory	The machine’s memory is full.	Press Stop/Exit and delete the previously
Secure Print Data		stored secure print data.
		(See Software User's Guide: Secure Print
is full.
		Key.)
Print Unable XX	The machine has a mechanical	Do one of the following:
	problem.	 Turn the power switch off, wait a few
		minutes, and then turn it on again.
		 If the problem continues, call Brother
		Customer Service.
Protected Device	The protect switch of the USB	Turn off the protect switch of the USB Flash
	Flash memory drive is on.	memory drive.
Rename the File	There is already a file on the	Change the file name of the file on the USB
	USB Flash memory drive with	Flash memory drive or the file you are trying to
	the same name as the file you	save.
	are trying to save.
Replace Parts	It is time to replace the drum	Replace the drum unit.
Drum	unit.	(See Replacing the drum unit uu page 48.)
	The drum unit counter was not	Reset the drum unit counter.
	reset when a new drum was	(See Resetting the drum counter uu page 51.)
	installed.

56