Chapter 7

Changing the SCAN key settings

Before scanning

To use the machine as a scanner, install a scanner driver. If the machine is on a network, configure it with a TCP/IP address.

Install the scanner drivers from the Installer CD-ROM. (See Quick Setup Guide.)

Configure the machine with a TCP/IP address if network scanning does not work. (See Software User's Guide: Configuring Network Scanning (Windows®).)

SCAN key settings

You can change your machine’s SCAN key settings using ControlCenter4.

a Open ControlCenter4 by clicking Start/All Programs/Brother/XXX-XXXX(where XXX-XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.

b c d

Make sure the machine you want to use is selected from the Model pull-down list.

Click the Device Settings tab.Click Device Scan Settings.

34