Chapter 1
Basic Operations
The following steps show how to change a setting in the machine. In this example the Paper Type setting is changed from Plain Paper to Inkjet Paper.
a Press Menu.
b Press a or b to choose General Setup.
MENU | Select & Press OK |
Ink Management |
|
General Setup | OK |
Network
Print Reports
Press OK.
c Press a or b to choose Paper Type.
d Press d or c to choose Inkjet Paper. Press OK.
You can see the current setting on the LCD:
| Generall Setup | Select & Press OK | |
|
|
|
|
| Paper Type | Inkjet Paper |
|
|
| ||
| Paper Size | A4 |
|
| LCD Settings |
|
|
| Sleep Mode | 5Mins |
|
|
| ||
e Press Stop/Exit.
Warning LED indications
The Warning LED (light emitting diode) is a light that shows the status of the machine, as shown in the table.
LED | DCP status | Description |
| Ready | The DCP is ready for |
|
| use. |
Off |
|
|
|
|
|
| Cover open | The cover is open. Close |
|
| the cover. (See Error |
|
| |
Orange |
| |
|
| |
Cannot Print | Replace the ink cartridge | |
|
| with a new one. (See |
|
| |
|
| |
|
|
|
| Paper error | Put paper in the tray or |
|
| clear the paper jam. |
|
| Check the LCD |
|
| message. (See Error |
|
| |
|
| |
|
|
|
| Other | Check the LCD |
| messages | message. (See Error |
|
| |
|
| |
|
|
|
6