Press Menu.

Machine Information

Checking the serial number

You can see the machine’s serial number on the LCD.

a Press Menu.

b Press a or b to choose

Machine Info.

Press OK.

c Press a or b to choose Serial No. Press OK.

d Press Stop/Exit.

Reset functions

The following reset functions are available:

1Network

You can reset the print server back to its default factory settings such as the IP address information.

2All Settings

You can reset all the machine settings back to the settings that were set at the factory.

Brother strongly recommends you use this operation when you dispose of the machine.

Note

Unplug the interface cable before you choose Network or All Settings. (DCP-J715W only)

Troubleshooting

How to reset the machine

a

b Press a or b to choose Initial Setup. Press OK.

c Press a or b to choose Reset. Press OK.

d Press a or b to choose the type of reset you want to use.

Press OK.

Press + to confirm.

e Press + to reboot the machine.

B

51