f Using both hands, grasp the plastic tabs on both sides of the machine and lift the scanner cover (1) until it locks securely in the open position.

1

Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine. Check both ends of the print carriage.

Note

If the print head is at the right corner as shown in the illustration, you cannot move it. Re-connect the power cord, then hold down Stop/Exit until the print head moves to the middle. Unplug the machine from the power source, and take out the paper.

IMPORTANT

If ink gets on your skin or clothing immediately wash it off with soap or detergent.

Troubleshooting

g Lift the scanner cover to release the

lock (). Gently push the scanner cover support down () and close the scanner cover () using both hands.

1

2

3

h Push the paper tray firmly back into the machine.

i While holding the paper tray in place,

pull out the paper support ( ) until it

 

clicks, and then unfold the paper

B

support flap ( ).

 

2

1

Make sure you pull out the paper support until it clicks.

IMPORTANT

DO NOT use the paper support flap for Legal size paper.

j Re-connect the power cord.

45