3 Loading documents
How to load documents
You can make copies and scan from the ADF (automatic document feeder) and from the scanner glass.
Using the ADF (DCP-J715W only)
The ADF can hold up to 15 pages and feeds each sheet individually. Use standard 80 gsm paper and always fan the pages before putting them in the ADF.
Make sure documents written with ink are completely dry.
a Unfold the ADF Document Output Support Flap (1).
b Fan the pages well. | 3 |
| |
c Adjust the paper guides (2) to fit the |
|
width of your document. |
|
d Make sure you place your documents, face down, top edge first in the ADF underneath the guides until you feel them touch the feed roller and the LCD shows ADF Ready.
Paper: | 80 gsm A4 |
Length: | 148 to 355.6 mm |
Width: | 148 to 215.9 mm |
Weight: | 64 to 90 gsm |
|
|
IMPORTANT
•DO NOT pull on the document while it is feeding.
•DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
•DO NOT use cardboard, newspaper or fabric. Instead use the scanner glass.
2 
1
IMPORTANT
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
Using the scanner glass
You can use the scanner glass to copy or scan pages of a book or one page at a time.
Document Sizes Supported
Length: | Up to 297 mm |
Width: | Up to 215.9 mm |
Weight: | Up to 2 kg |
|
|
21 