Error Message | Cause | Action | |||
Out of Memory | The machine's memory is full. | Copy operation in progress: | |||
|
|
|
| Press Stop/Exit and wait until the other | |
|
|
|
| operations in progress finish and then try | |
|
|
|
| again. | |
|
|
|
|
| |
|
| The memory card or USB Flash | Delete unused files from your memory card | ||
|
| memory drive you are using does | or USB Flash memory drive to make some | ||
|
| not have enough free space to | free space and then try again. | ||
|
| scan the documents. |
| ||
|
|
|
| ||
Paper Jam | Paper is jammed in the machine. | Remove the jammed paper by following | |||
|
|
|
| the steps in Printer jam or paper jam | |
|
|
|
| ||
|
|
|
|
| |
|
|
|
| Make sure the paper length guide is | |
|
|
|
| adjusted to the correct paper size. | |
|
|
| |||
Unable to Clean XX | The machine has a mechanical | Open the scanner cover and remove any | |||
Unable to Init. XX | problem. | foreign objects and paper scraps inside the | |||
machine. If the error message continues, | |||||
Unable to Print XX | disconnect the machine from the power for | ||||
A foreign object such as a paper | |||||
Unable to Scan XX | several minutes, then reconnect it. | ||||
clip or ripped paper is in the |
| ||||
|
| machine. |
| ||
|
|
| |||
Unusable Device | A broken device has been | Unplug the device from the USB direct | |||
Disconnect device from | connected to the USB direct | interface, then press On/Off to turn the | |||
interface. | machine off and then on again. | ||||
front connector & turn |
|
|
| ||
machine off & then on |
|
|
| ||
Unusable Device | A USB device or USB Flash | Unplug the device from the USB direct | |||
Please Disconnect | memory drive that is not | interface. | |||
supported has been connected |
| ||||
USB Device. | to the USB direct interface. |
| |||
|
|
| |||
|
| (For more information, visit us at |
| ||
|
|
| |||
|
|
| |||
Wrong Paper Size | Paper is not the correct size. | Check that the Paper Size setting matches | |||
|
|
|
| the size of paper in the tray. Load the | |
|
|
|
| correct size of paper, and then press | |
|
|
|
| Mono Start or Colour Start. (See Paper | |
|
|
|
| ||
|
|
|
|
| |
42