Chapter 5
Print Images
View Photos
You can preview your photos on the LCD before you print them. If your photos are large files there may be a delay before each photo is displayed on the LCD.
a Make sure you have put the memory card or USB Flash memory drive in the correct slot.
Press 
(PHOTO CAPTURE).
b Press a or b to choose View Photo(s). Press OK.
c
d Press + or - repeatedly to enter the number of copies you want.
e Repeat steps c and d until you have chosen all the photos.
Note
Press Clear to go back to the previous level.
f After you have chosen all the photos, do one of the following:
Press OK and change the print settings. (See PhotoCapture Center™ print settings on page 28.)
If you do not want to change any settings, press Colour Start to print.
PhotoCapture Center™ print settings
You can change the print settings temporarily for the next print.
The machine returns to its default settings after 3 minutes.
Note
You can save the print settings you use most often by setting them as the default. (See Setting your changes as a new default in chapter 4 in the Advanced User’s Guide.)
1 |
| Printi | Settingi | Print Press Start |
|
|
| |
|
|
| ||||||
|
|
| ||||||
|
| 0001 |
|
|
|
|
| |
|
|
|
|
|
|
| ||
|
| Print Quality | Photo |
| ||||
|
|
| ||||||
|
| Paper Type | Other Glossy |
|
| |||
|
| Paper Size | 10x15cm |
| ||||
|
|
| ||||||
1No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
28