Press Menu, 2, 0, 2.
PhotoCapture Center™ Difficulties

Difficulty

Suggestions

Removable Disk does not work

1

Have you installed the Windows® 2000 update? If not, do the following:

correctly.

 

1) Unplug the USB cable.

 

 

 

 

2) Install the Windows® 2000 update using one of the following methods.

 

 

„ Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup Guide.)

 

 

„ Download the latest service pack from the Microsoft Web site.

 

 

3) Wait about 1 minute after you restart the PC, and then connect the USB cable.

 

2

Take out the memory card or USB Flash memory drive and put it back in again.

 

3

If you have tried ‘Eject’ from within Windows®, take out the memory card or

 

 

USB Flash memory drive before you continue.

 

4

If an error message appears when you try to eject the memory card or USB

 

 

Flash memory drive, it means the card is being accessed. Wait a while and

 

 

then try again.

 

5

If all of the above do not work, turn off your PC and machine, and then turn them

 

 

on again. (You will have to unplug the power cord of the machine to turn it off.)

 

 

Cannot access Removable Disk

Make sure that you have correctly inserted the memory card or USB Flash

from Desktop icon.

memory drive.

 

 

Part of my photo is missing when

Make sure that Borderless Printing and Cropping are turned off. (See Borderless

printed.

printing on page 69 and Cropping on page 69.)

 

 

 

Dial Tone detection

When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number. By changing the Dial Tone setting to Detection you can make your machine dial as soon as it detects a dial tone. This setting can save a small amount of time when sending a fax to many different numbers. If you change the setting and start having problems with dialling you should change back to the default No Detection setting.

a Press Menu, 0, 5.

(Menu, 0, 4 for New Zealand).

b Press a or b to choose Detection or No Detection.

Press OK.

c Press Stop/Exit.

Telephone line interference

If you are having problems sending or receiving a fax due to possible interference on the telephone line, we recommend that you adjust the Equalization for compatibility to reduce the modem speed for fax operations.

a

b Press a or b to choose Normal (or Basic(for VoIP)).

„Basic(for VoIP) cuts the modem speed to 9600 bps. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed.

„Normal sets the modem speed at 14400 bps. (Default)

Press OK.

c Press Stop/Exit.

Note

When you change the compatibility to Basic(for VoIP), the ECM feature is only available for colour fax sending.

100