
Note
Press Stop/Exit.
e
Enter the new Remote Activation Code. Press OK.
Press a or b to choose On (or Off). Press OK.
b c
d Enter the new Remote Deactivation Code.
Press OK.
Press Menu, 2, 1, 4. 1.Setup Receive
4.Remote Codes
a
Remote Deactivation Code
If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (double) ring after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by pressing # 5 1 (# 9 1 for New Zealand) (make sure you press this between the rings).
If the machine answers a voice call and pseudo/double rings for you to take over, you can take the call at the external telephone by pressing Hook.
Changing the remote codes
If you want to use Remote Activation, you have to turn on the remote codes. The preset Remote Activation Code is l 5 1 (l 9 1 for New Zealand). The preset Remote Deactivation Code is # 5 1 (# 9 1 for New Zealand). If you want to, you can replace them with your own codes.
Telephone and External devices
7
•If you are always disconnected when accessing your external TAD remotely, try changing the Remote Activation Code and Remote Deactivation Code to another , #.
•Remote Codes might not work with some telephone systems.
47