
Chapter 10
Changing copy speed and qualityYou can choose from a range of quality settings. The default setting is Normal.
To temporarily change the quality setting, follow the instructions below:
To change the default setting, follow the instructions below:
a Press Menu, 3, 1.
1.Quality
b Press a or b to choose Fast, Normal or Best quality. Press OK.
Press
and then a or b to choose
Quality
Normal Normal is the recommended mode for ordinary print outs. This produces good copy quality with good copy speed.
Fast Fast copy speed and lowest ink consumption. Use to save time printing
c Press Stop/Exit.
Enlarging or reducing the image copiedYou can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.
documents to be
Best Use best mode to copy precise images such as photographs. This provides the highest resolution and the slowest speed.
Press
and then a or b to
choose
Enlarge/Reduce
Fit to Page
198% 10x15cmiA4
186% 10x15cmiLTR
142% A5iA4
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
a Make sure you are in Copy mode . b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Copy Options and a or b to choose Quality.
Press OK.
e Press a or b to choose Fast, Normal or Best quality. Press OK.
f Press Mono Start or Colour Start.
69% A4iA5
47% A4i10x15cm
56