Loading documents

You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass.

Using the ADF (MFC-290C only)

The ADF can hold up to 15 pages and feeds each sheet individually. Use standard 80 gsm paper and always fan the pages before putting them in the ADF.

Recommended environment

Temperature:

20 to 30° C

Humidity:

50% to 70%

Paper:

80 gsm

 

 

Document Sizes Supported

Length:

148 to 355.6 mm

Width:

148 to 215.9 mm

Weight:

64 to 90 gsm

 

 

How to load documents

CAUTION

DO NOT pull on the document while it is feeding.

DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.

DO NOT use cardboard, newspaper or fabric with the ADF. Instead use the scanner glass.

Loading paper and documents

„Make sure documents with ink or liquid correction fluid are completely dry.

a Unfold the ADF Document Output Support Flap (1).

b Fan the pages well.

2

c Make sure you place the documents face down, top edge first in the ADF until you feel them touch the feed roller.

d Adjust the paper guides (2) to fit the width of your documents.

2

1

CAUTION

DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

Using the scanner glass

You can use the scanner glass to fax, copy or scan pages of a book one page at a time.

Document Sizes Supported

Length:

Up to 297 mm

Width:

Up to 215.9 mm

Weight:

Up to 2 kg

 

 

17