(Speed Dial), 09. The LCD shows:
G01:#05#09
e Press OK when you have finished adding numbers.
f Use the dial pad to enter a name for the Group.
Press OK.
50
(Speed Dial), 05,
05 and 09. Press
Chapter 8
Setting up groups for broadcasting
Groups, which can be stored in a Speed Dial location, allow you to send the same fax message to many fax numbers by pressing
only (Speed Dial), Search, OK, #, the two-digit location and Mono Start. First, you'll need to store each fax number in a Speed- Dial location. Then you can include them as numbers in the Group. Each Group uses up a Speed Dial location. You can have up to six Groups, or you can assign up to 39 numbers in a large Group.
a Press (Speed Dial) and a or b to choose Setup Groups.
Press OK.
b Use the dial pad to enter the two-digit Speed Dial number where you want to store the Group.
Press OK.
c Use the dial pad to enter a Group number (1 to 6).
Press OK.
Setup Group:G0_
d To add Speed Dial numbers follow the instructions below:
For example, for Speed Dial numbers

Note

You can easily print a list of all your Speed Dial numbers. Numbers that are part of a group will be marked in the GROUP column. (See How to print a report on page 52.)

Combining Quick Dial numbers

Sometimes you may want to choose from several long distance carriers when you make a call. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Speed Dial numbers. You can store these long dialling sequences by dividing them and setting them up as separate Speed Dial numbers in any combination. You can even include manual dialling using the dial pad. (See Storing Speed Dial numbers on page 49.)

For example, you might have stored ‘555’ on Speed Dial #03 and ‘7000’ on Speed Dial #02. You can use them both to dial ‘555-7000’ if you press the following keys:

(Speed Dial), OK, #03, (Speed Dial), #02, and Start.

To temporarily change a number, you can substitute part of the number with manual dialling using the dial pad. For example, to change the number to 555-7001 you could press the following keys:

(Speed Dial), OK, #03, 7, 0, 0, 1 (on the dial pad), and Start.

You can also add a pause by pressing the Redial/Pause key.