To enlarge or reduce the next copy follow the instruction below:

a Make sure you are in Copy mode . b Load your document.

c Use the dial pad to enter the number of copies (up to 99).

d Press Copy Options and a or b to choose Enlarge/Reduce. Press OK.

e Do one of the following:

„Press a or b to choose the enlargement or reduction ratio you want. Press OK.

„Press a or b to choose

Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK.

f Press Mono Start or Colour Start.

Note

•Enlarge/Reduce is not available with

Page Layout.

•Fit to Page does not work properly if the document on the scanner glass is skewed by more than 3 degrees. Using the document guide lines on the left and top, place your document in the upper left hand corner, with the document face down on the scanner glass.

•Fit to Page is not available for a Legal size document.

Making copies

Making N in 1 copies or a poster (Page Layout)

The N in 1 copy feature can help you save paper by letting you copy two or four pages onto one printed page.

You can also produce a poster. When you use the poster feature your machine divides your document into sections, then enlarges the sections so you can assemble them into a poster. If you want to print a poster, use the scanner glass.

Important

„Make sure paper size is set to Letter or A4.

„You cannot use the Enlarge/Reduce and Sort settings (MFC-290C) with the N in 1 and Poster features.

„N in 1 colour copies are not available.

„(P) means Portrait and (L) means Landscape.

„You can only make one poster copy at a time.

a Make sure you are in Copy mode

10

.

b Load your document.

c Use the dial pad to enter the number of copies (up to 99).

d Press Copy Options and a or b to choose Page Layout.

Press OK.

e Press a or b to choose Off(1 in 1),

2in 1 (P), 2 in 1 (L),

4in 1 (P), 4 in 1 (L) or Poster(3 x 3).

Press OK.

57