Open the ADF cover.
Transferring your faxes or Fax Journal report

If the LCD shows:

Clean Unable XX

Init Unable XX

Print Unable XX

Scan Unable XX

We recommend transferring your faxes to another fax machine. (See Transferring faxes to another fax machine on page 105.)

You can also transfer the Fax Journal report to see if there are any faxes you need to transfer. (See Transferring the Fax Journal report to another fax machine on page 105.)

Note

If there is an error message on the machine's LCD, after the faxes have been transferred, disconnect the machine from the power source for several minutes, and then reconnect it.

Transferring faxes to another fax machine

If you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (station ID) in the Quick Setup Guide.)

a Press Menu, 9, 0, 1.

b Do one of the following:

„If the LCD shows No Data, there are no faxes left in the machine's memory.

Press Stop/Exit.

„If the LCD shows Enter Fax No., enter the fax number to which faxes will be forwarded.

c Press Mono Start.

Troubleshooting and Routine Maintenance

Transferring the Fax Journal report to another fax machine

If you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (station ID) in the Quick Setup Guide.)

a Press Menu 9, 0, 2.

b Enter the fax number to which the Fax Journal report will be forwarded.

c Press Mono Start.

Document jam (MFC-290C only)

Documents can jam in the ADF unit if they are not inserted or fed properly, or if they are too long. Follow the steps below to clear a document jam.

Document is jammed in the top of the ADF unit

a Take out any paper from the ADF that is not jammed.

b

c Pull the jammed document up and to the left.

d Close the ADF cover.

B

e Press Stop/Exit.

 

Note

To avoid future document jams close the ADF cover correctly by pushing it gently in the middle.

105