11 - 1 IMPORTANT INFORMATION
11
Standard telephone and FCC Notices
These notices are in effect o n models sold and
used in the United States only.
This equipment is hearing-aid compatible. (FAX-1840C and
FAX-1940CN only)
When programming emergency numbers or making test calls to
emergency numbers:
■Remain on the line and brief ly explain to the dispatcher the
reason for the call before hanging up.
■Perform these activities in the off-peak hours, such as early
morning or late evening.
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the backside of this equipment
is a label that contains, among other information, a product identifier in
the format US: AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
You may safely connect this equipment to the telephone line by means
of a standard modular jack, USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is des igned to be
connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX.The digits
represented by ## are the REN without a decimal point (e.g., 06 is a REN
of 0.6). For earlier products, the REN is separately shown on the label.
Important information