Brother MFC-3340CN, FAX-1840C, FAX-1940CN Choosing the Handset V olume (For Volume Amplify) (FAX-1840C and FAX-1940CN only)

GETTING STARTED 2 - 8
Choosing the Handset V olume
(For Volume Amplify)
(FAX-1840C and FAX-1940CN only)
Before you begin to use the machine, you must decide if you need to
set the handset volume to Volume Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is ap propriate if none of the users are
hearing-impaired. During a c onversation, users can pres s or
on the control panel to ad just the volume to Low or High. When the
handset is replaced, the handset volume will remain until you change
it again.
Volume Amplify:On—Tempora ry
This setting is appropriate if some of the users are hearing- impaired.
During a conversation, user s can press o r on the control
panel to adjust the volume to Lo w, High or Volume Amplify.
When the handset is replaced, the handset volume returns to th e
default setting of Low.
Volume Amplify:On—Permane nt
Choose Volume Amplify:On—Permanent if all of the users are
hearing-impaired. During a c onversation, users can pres s or
on the control panel to adju st the volume to Beeper:Low,
Beeper:High or Volume Ampli fy. When the handset is replaced,
the handset volume returns to the default setting of Volume
Amplify.
WARNING
It is important that you do NOT choose Permanent unless ALL
the users are hearing-impaired. Otherwise, the default setting of
Volume Amplify may dam age the hearing of so me users.
When you press or on the control panel to adjust the
volume, the LCD shows the setting you are choosing. Each key
press changes the volume to the next setting.