GETTING STARTED 2 - 6
Setting the Speaker Volume
You can adjust the speaker volume.
1
Press Menu/Set, 1, 4, 3.
2
Press ▲ or ▼ to select
Low, Med, High or Off.
Press Menu/Set.
3
Press Stop/Exit.
—OR—
Press Hook, and then adjust the speaker volume by pressing
or . The LCD shows the setting you are ch oosing. Each
key press changes the volume to the next setting. The new
setting will remain until you change it again.
FAX-1940CN only
When ( Fax) is illuminated you can also change the speaker
volume in the following ways:
Press Speaker Phone, and then adjust the speaker volume by
pressing or . The L CD shows the setting you are
choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
—OR—
You can adjust the speaker vol ume while you are listening to
your OGM (Outgoing Mes sage) and ICMs (In coming Messages)
by pressing or .
If you turn Incoming Recording Monitor to OFF (Menu/Set, 2,
7, 3) the Speaker for screening calls will be disabled and you
won’t hear callers leavin g messages. The volume for other
operations can still be controlled using or .
3.Speaker