Brother MFC-7362N, MFC-7470D manual 142

Level 1	Level 2	Level 3	Level 4	Options	Descriptions
5.Network	1.TCP/IP	1.Boot	—	Auto*	Chooses the Boot
(MFC-7360N /		Method		Static	method that best
					suits your needs.
MFC-7362N /				RARP
MFC-7460DN)
				BOOTP
				DHCP
		2.IP Address	—	[000-255]. [000-255].	Enter the IP address.
				[000-255]. [000-255]
		3.Subnet	—	[000-255]. [000-255].	Enter the Subnet
		Mask		[000-255]. [000-255]	mask.
		4.Gateway	—	[000-255]. [000-255].	Enter the Gateway
				[000-255]. [000-255]	address.
		5.Node Name	—	BRNXXXXXXXXXXXX	Enter the Node
					name.
		6.WINS	—	Auto*	Chooses the WINS
		Config		Static	configuration mode.
		7.WINS	—	Primary	Specifies the IP
		Server		[000-255]. [000-255].	address of the
				[000-255]. [000-255]	primary or secondary
					WINS server.
				Secondary
				[000-255]. [000-255].
				[000-255]. [000-255]
		8.DNS Server	—	Primary	Specifies the IP
				[000-255]. [000-255].	address of the
					primary or secondary
				[000-255]. [000-255]
					DNS server.
				Secondary
				[000-255]. [000-255].
				[000-255]. [000-255]
		9.APIPA	—	On*	Automatically
				Off	allocates the IP
					address from the
					link-local address
					range.
		0.IPv6	—	On	Enable or Disable the
				Off*	IPv6 protocol. If you
					want to use the IPv6
					protocol, visit
					http://solutions.
					brother.com/ for
					more information.
	See Network User’s Guide.
	The factory settings are shown in Bold with an asterisk.

132