
Replacing the drum unit
Model name:
(For Asia)
A new drum unit can print approximately 12,000 A4 or Letter size
IMPORTANT
For best performance, use only a genuine Brother Original drum unit and genuine Brother Original toner units. Printing with a
Drum Error
The corona wire has become dirty. Clean the corona wire in the drum unit. (See Cleaning the corona wire on page 72.)
If you cleaned the corona wire and Drum Error was not cleared, replace the drum unit with a new one.
Replace DrumReplace Drum
Please replace the drum unit with a new one. We recommend a genuine Brother Original drum unit be installed at this time.
After replacement, reset the drum counter by following the instructions included with the new drum unit.
Drum StopDrum Stop
66
We cannot guarantee the print quality. Please replace the drum unit with a new one. We recommend a genuine Brother Original drum unit be installed at this time.
After replacement, reset the drum counter by following the instructions included with the new drum unit.
Replacing the drum unitIMPORTANT
•While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
•Every time you replace the drum unit, clean the inside of the machine. (See Cleaning the machine on page 70.)
a Make sure that the machine is turned on.
b Open the front cover and leave the machine turned on for 10 minutes to cool down.
CAUTION
HOT SURFACE
After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover (back output tray) of the machine, DO NOT touch the shaded parts shown in the illustration. If you do this, you may get burned.