Chapter 13

Getting started

Firmly put a memory card or USB Flash memory drive into the correct slot.

1

2

3

4

5

1USB Flash memory drive

2CompactFlash®

3SD, SDHC

4Memory Stick™, Memory Stick PRO™

5xD-Picture Card™

CAUTION

The USB direct interface supports only a USB Flash memory drive, a PictBridge compatible camera, or a digital camera that uses the USB mass storage standard. Any other USB devices are not supported.

Photo Capture key indications:

„Photo Capture light is on, the memory card or USB Flash memory drive is correctly inserted.

„Photo Capture light is off, the memory card or USB Flash memory drive is not correctly inserted.

„Photo Capture light is blinking, memory card or USB Flash memory drive is being read or written to.

CAUTION

DO NOT unplug the power cord or remove the media from the media drive (slot) or USB direct interface while the machine is reading or writing to the media (the Photo Capture key is blinking). You will lose your data or damage the card.

The machine can only read one device at a time.

Entering PhotoCapture mode

After you insert the memory card or USB Flash memory drive, press the

(Photo Capture) key to illuminate it in

blue and the LCD displays the PhotoCapture options.

The LCD shows:

PhotoCapture

View

Enhance

Index

Photos

Photos

Print

„Press View Photos if you want to quickly view and print your photos. See View Photos on page 99.

„Press Enhance Photos if you want to add special effects to your photos. See Enhance Photos on page 101.

„Press Index Print if you want to print an Index page (Thumbnails). You can also print photos using the image numbers of the Index page (Thumbnails). See Print Index (Thumbnails) on page 99.

Note

If your digital camera supports DPOF printing, see DPOF printing on page 102.

Press the option you want to set.

98