Press P.Save Setting.
Press MENU.
Press a or b to display General Setup.
Press General Setup.

3 General setup

Power Save mode

You can put the machine into Power Save mode by pressing the Power Save key. You can still receive telephone calls in Power Save mode. For further information on receiving faxes in the Power Save condition, please see the table on page 24. The delayed faxes that have been set up will be sent. You can even retrieve faxes using Remote Retrieval if you are away from your machine. If you want to do other operations, you must take the machine out of Power Save mode.

Note

If you have connected an external telephone or TAD, it is always available.

Putting your machine inPower Save mode

a Press the Power Save key. The LCD will tell you that you cannot use the phone once it is switched off.

Press Yes.

The LCD shows Shutting Down and will stay on for a few seconds before going off.

Bringing your machine out of Power Save mode

a Press the Power Save key.

The LCD shows the date and time.

Note

Even if you have put the machine into Power Save mode, it will periodically clean the print head to preserve print quality.

If you unplug the AC power cord, no machine operations will be available.

You can customize Power Save mode so that, apart from automatic head cleaning, no machine operations are available. (See Power Save setting on page 23.)

Power Save setting

You can customize the machine's

 

Power Save key. The factory setting is

 

Fax Receive:On. Your machine can

3

receive faxes or calls even when the machine

is in Power Save mode. If you do not want your machine to receive faxes or calls, turn this setting to Fax Receive:Off.

a b

c

d Press a or b to display P.Save Setting.

e

f Press Fax Receive:Off or Fax Receive:On.

„(MFC-790CW) Go to step h.

„(MFC-990CW) If you choose

Fax Receive:On, go to step g.

„If you choose Fax Receive:Off, go to step h.

g Press Ring Tone:On.

Make sure you set the Ring Volume to Low, Med or High. (See Ring Volume on page 26.)

h Press Stop/Exit.

Note

If you choose Ring Tone:Off, the machine will not ring when you receive a call.

23