Error Message

Cause

Action

Out of Memory

The machine's memory is full.

If a copy operation is in process:

 

 

 

Press Stop/Exit and wait until the

 

 

 

other operations in progress finish,

 

 

 

and then try again.

 

 

 

 

 

 

The memory card or USB Flash

Press Stop/Exit.

 

 

memory drive you are using does not

Delete unused files from your memory

 

 

have enough free space to scan the

 

 

card or USB Flash memory drive to

 

 

document.

 

 

make some free space and then try

 

 

 

 

 

 

again.

 

 

 

Paper Jam [Front]

Paper is jammed in the machine.

Remove the jammed paper by

 

 

 

following the steps in Paper is jammed

 

 

 

at the front of the machine

 

 

 

uu page 75.

 

 

 

Make sure the paper length guide is

 

 

 

set to the correct paper size. DO NOT

 

 

 

extend the paper tray when you load

 

 

 

A5 or smaller size paper.

 

 

 

PaperJam Front,Rear

Paper is jammed in the machine.

Remove the jammed paper by

 

 

 

following the steps in Paper is jammed

 

 

 

at the front and back of the machine

 

 

 

uu page 77.

 

 

 

Make sure the paper length guide is

 

 

 

set to the correct paper size. DO NOT

 

 

 

extend the paper tray when you load

 

 

 

A5 or smaller size paper.

 

 

 

Paper Jam [Rear]

Paper is jammed in the machine.

Remove the jammed paper by

 

 

 

following the steps in Paper is jammed

 

 

 

at the back of the machine

 

 

 

uu page 76.

 

 

 

Make sure the paper length guide is

 

 

 

set to the correct paper size.

 

 

 

DO NOT extend the paper tray when

 

 

 

you load A5 or smaller size paper.

 

 

 

 

 

 

Paper dust has accumulated on the

Clean the paper pick-up rollers and

 

 

surface of the paper pick-up rollers

the back sides of the paper feed

 

 

and the back sides of the paper feed

rollers. (uuAdvanced User’s Guide:

 

 

rollers.

Cleaning the paper pick-up rollers)

 

 

 

Screen init. Fail

The Touchscreen was pressed before

Make sure that nothing is touching or

 

 

the power on initialization was

resting on the Touchscreen.

 

 

completed.

 

 

 

 

 

 

 

Debris may be stuck between the

Insert a piece of stiff paper between

 

 

lower part of the Touchscreen and its

the lower part of the Touchscreen and

 

 

frame.

its frame and slide it back and forth to

 

 

 

push out the debris.

 

 

 

 

70