1Use the network cable to connect the PS-9000 to the Ethernet hub.

2Connect the AC adapter to the PS-9000, and then plug the power cable of the P-touch and PS-9000 into the electrical outlet.

3Use the USB cable to connect the PS-9000 to the P-touch. (PS-9000: Type A connector; P-touch: Type B connector)

Note

The USB cable has two different types of connectors. Be sure to insert the correct type of connector into the correct port.

USB Cable Connectors

Type A

Type B

4Turn on the P-touch.

Caution

Using an AC adapter other than the one supplied with PS-9000 may result in damage.

Do not connect devices other than a P-touch to the PS-9000 USB port.

Wait more than 2 seconds between connecting and disconnecting the USB cable.

Do not disconnect the USB cable while printing.

P-touch

Ethernet HUB

PS-9000

Note

The shape of the power cord depends on your model.

10

Page 11
Image 11
Brother PS-9000 user manual USB Cable Connectors, Turn on the P-touch