BT DF450 manual Name and fax number position, International codes

Setting up

•Press 6 on the keypad until N appears on the display. The whole name is now entered.

•To enter a space, press the ♣ button.

When entering a name, you can insert various symbols, such as &, using the ✱ and # buttons to scroll through the options.

You can move back and forth to the letters you want by pressing the ◀ ♣ buttons. Delete the whole name by pressing the CLEAR button. Press the A - a button to change between CAPITAL LETTERS and small letters.

•Press the START button to confirm your selection; the display shows PHONE NUMBER.

•Press the START button again; the display shows TYPE YOUR NUMBER. Dial in your number.

•To enter a space, press the ♣ button.

You can scroll back and forth to change any digits using the ◀ ♣ buttons.

•Press the START button to confirm your number. Display shows DIAGNOSTICS. To return to the DF450’s standby mode, press the STOP button. Or if you wait, the DF450 will automatically return to standby.

Your DF450 has back-up batteries fitted. In case of a power cut or disconnection from the mains, it will remember the date and time as well as any numbers and names stored in the memory.

International codes

You can display your number as an international number. Press the ✱ button. This is printed on your header as a +.

For example, +44 171 123 1234.

11Name and fax number position

Your name and fax number can be printed inside or outside the image area of a sent document. Your DF450 is pre-set to print this information inside.

To change header position

START FUNCTION

•Press the FUNCTION button until the display shows FAX SET-UP.

•Press the START button until the display shows HEADER INSIDE.

•Press the ♣ button; the display shows

HEADER OUTSIDE.

•Press the START button to confirm setting.

•Press the STOP button to return to standby.

13