TAD FAX RX (telephone answering device)
This allows your DF450 and a connected answering machine to take phone and fax calls.
When a phone call is received, the answering machine will take it and the display will show
OFF HOOK.
If the call is a fax, your DF450 will override the answering machine and automatically receive the fax - normally after the outgoing message has been played.
AUTOMATIC RX
This mode is for use when you are using your DF450 as a fax machine only. Faxes are received and printed automatically.
There is no audible indication of an incoming call in this mode.
Using your DF450
Using a phone or answering machine with your DF450
To make a call from an attached phone
You can make a phone call in a number of ways
either
•By using the phone as normal. or
•Press the MONITOR button on the DF450 and dial the number, pick up the handset and wait for the number to answer.
or
•You can use the telephone numbers stored in your DF450’s memories. To dial a phone number, make sure the Automatic Document Feeder is empty. Select the One Touch buttons or Quickdial codes. Press the START button, pick up the handset to speak.
Using the HOLD button
When using a telephone with the DF450, you may not want your caller to hear your conversation with someone else in the room. Press the HOLD button and you can talk without your caller hearing. Your caller will only hear a regular tone to show that the line is open. Press the HOLD button again to return to your caller.
18
