BT manual Connecting your DF450 to a direct exchange line, Inserting a pause

Additional features

Connecting your DF450 to a direct exchange line

Your DF450 is pre-set to TONE dial for connection to direct exchange lines. In the unlikely event that you need to change this setting to PULSE dialling:

START FUNCTION

•Press the FUNCTION button until the display shows INSTALLATION.

•Press the START button until the display shows PSTN DIAL: TONE.

•Press the ♣ button to select PULSE.

•Press the START button to confirm the setting.

•Press the STOP button to return to standby.

Connecting your DF450 to a private switchboard

For the DF450 to use the functions of a switchboard, you may need to change the TONE/PULSE setting and the PUBL. LINE to the PRIV. LINE setting. If in doubt, ask your communications manager or switchboard supplier.

START FUNCTION

•Press the FUNCTION button until the display shows INSTALLATION.

•Press the START button until the display shows TEL LINE SET-UP.

•Press the START button. Display shows

PUBL. LINE (PSTN).

•Press the ♣ button to select PRIV.LINE (PBX)

•Press the START button to confirm the setting; the display shows PBX DIAL:TONE. To select PBX DIAL: PULSE, press

the ♣ button.

•Press the START button to confirm the setting.

•Press the STOP button to return to standby.

Inserting a pause

Some switchboards require a delay between dialling the access code and the fax/phone number. You can press the PAUSE button to insert this delay before dialling the number.

31