BT DF450 manual Adjusting for different-size paper

Adjusting for different-size paper

To send a different-size document

Your DF450 can send documents from

148 x 148mm up to 216 x 600mm in size. Adjust the document feeder (if necessary) by moving the side supports.

A4 I

To receive a different-size document

The automatic sheet feeder is pre-set to take A4 (210mm wide) paper, but can be adjusted to take paper 216mm wide also.

START FUNCTION

•Press the FUNCTION button.

•Press the START button until the display reads SIZE:

•Press the ◀ ♣ buttons to select between

SIZE:A4, SIZE: LETTER and SIZE: LEGAL.

A4 - 210mm wide, Legal and letter - 216mm wide.

•Press the START button to confirm your selection.

•Press the STOP button to return the DF450 to standby.

Additional features

To change the automatic sheet feeder cassette to take different-size paper

Your DF450 automatic sheet feeder can hold A4 (210mm wide) or Legal (216mm wide) paper. Adjust the automatic sheet feeder (if necessary) by moving the side supports.

•First remove the paper cover from the front of the automatic sheet feeder.

•Insert a small coin into the small groove just in front of the hinge, this will release the hinge to allow you to pull out the cover.

•Insert a small coin in the groove at the bottom of the automatic sheet feeder to release the black side supports.

L A4

Repeat this action for both sides of the automatic sheet feeder.

28