USING C-PEN WITH YOUR PC

A working connection with a PC is required to install and remove applications in C-Pen. To enable this communica- tion certain hardware and software must be installed and configured properly on your PC.

The following is required for IR communication:

1.An IR port. Laptops often have a built-in IR port. Refer to your PC’s manual to find out whether your PC is equipped with an IR port and if so, where it is located. Most desktop PCs do not have a built-in IR port. In this case you must use an external IR adapter. Contact your retailer if you do not have an IR adapter.

2.Infrared drivers are included on the C-Pen CD. It is crucial to install the infrared driver properly.

3.C-Win Software. This software is installed from the C-Pen CD.

The following is required for cable communication:

1.Cable. The cable is included in the C-Pen package.

2.COM port (serial port). The cable should be plugged into an available COM port on your PC.

3.C-Win Software. This software is installed from the C- Pen CD.

Installing C-Win Software

C-Win Software and the infrared driver – if required – are installed when you run the installation programs on the C- Pen CD. The menu option Documentation on the C-Pen CD contains the User's Guide and Help. The installation

71

Page 71
Image 71
C Technologies C-Pen manual Using C-PEN with Your PC, Installing C-Win Software