Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems 6H122-08 manual 28 Flash Download Screen

Models: 6H122-08

1 170

Download 170 pages 13.93 Kb

Page 118

5.22FLASH DOWNLOAD SCREEN

Chapter 5: Local Management

5.22FLASH DOWNLOAD SCREEN

The Flash Download screen, shown in Figure 5-28, allows the user to clear the information stored in the 6H122-08 FLASH memory and download a new image ﬁle from a TFTP server.

NOTE

The user may also force a download by changing the position of Switch 6 located inside the module. Refer to Section C.2 for details.

Before downloading a new image to the module, load the image onto the network TFTP server.

NOTE

For information on how to set up a workstation as a TFTP server, refer to the speciﬁc workstation documentation.

Access the Flash Download screen from the Module Speciﬁc Conﬁguration screen by using the arrow keys to highlight the FLASH DOWNLOAD menu item and pressing ENTER. The Flash Download screen displays.

TFTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...

	6H122-08 LOCAL MANAGEMENT
	Flash Download
Module Type: 6H122-08		Firmware Revision: XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
	Download Method:	[TFTP]
	Reboot After Download:	[YES]
	TFTP Gateway IP Addr:	134.141.79.123
	Last Image Server IP:	134.141.79.121
	Last Image File Name:	/tftpboot/6E122.hex
	Download Server IP:	134.141.79.121
	Download File Name:	/tftpboot/6E122.hex
EXECUTE	EXIT
EXECUTE	EXIT		RETURN

2159-24

Figure 5-28 Flash Download Screen

5-74	6H122-08 User’s Guide

Image 118

Cabletron Systems 6H122-08 manual 28 Flash Download Screen

Contents

1X 2X 3X 4X 5X 6X 6H122-08 SmartSwitch 6000 Interface Module User’s Guide6H122-08 RESET CPU 100 MbsPage FCC NOTICE 6H122-08 User’s GuideCABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT INDUSTRY CANADA NOTICEVCCI NOTICE 6H122-08 User’s GuideUNITED STATES GOVERNMENT RESTRICTED RIGHTS EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITYCABLETRON SOFTWARE PROGRAM LICENSE 6H122-08 User’s GuideDECLARATION OF CONFORMITY 6H122-08 User’s GuideCHAPTER CONTENTSINSTALLATION INTRODUCTIONCHAPTER ContentsTROUBLESHOOTING CHAPTERContents 6H122-08 User’s GuideSPECIFICATIONS ContentsSPECIFICATIONS OPTIONAL INSTALLATIONS ANDCHAPTER INTRODUCTION 1.1 USING THIS GUIDE1.2 STRUCTURE OF THIS GUIDE Chapter 1 Introduction Structure of This Guide Reset Button COM Port System LED Port Status LEDs Network PortsRESET 6H122-08 User’s Guide1.3.1 Auto-Negotiation 1.3 6H122-08 OVERVIEW1.3.2 Connectivity 1.3.4 Management 1.3.3 Full Duplex Switched Ethernet FDSE1.3.5 Switching Options 1.3.6 Standards Compatibility1.3.8 Year 2000 Compliant 1.3.7 LANVIEW Diagnostic LEDs1.3.9 Runtime IP Address Discovery 1.4.2 Remote Monitoring RMON 1.4 LOCAL MANAGEMENT FEATURES1.4.1 Distributed Chassis Management 1.4.3 Broadcast Suppression1.4.4 Port Redirect Function 1.4.5 SmartTrunk1.5 OPTIONAL FEATURES 1.4.6 Additional Local Management FunctionsChapter 1 Introduction 1.6 DOCUMENT CONVENTIONSThe following conventions are used throughout this document 1-101.7 GETTING HELP 6H122-08 1.8 RELATED MANUALSThe following manuals may help the user to setup and manage the Cabletron Systems Cabling Guide2.1 SmartTrunk CHAPTER NETWORK REQUIREMENTS2.2 10BASE-T NETWORK Multimode Mode Fiber Optic Cable Length 2.3 100BASE-TX NETWORK2.4 100BASE-FX FIBER OPTIC NETWORK Single Mode Fiber Cable Lengths3.1 REQUIRED TOOLS CHAPTER INSTALLATION3.2 UNPACKING THE 6H122-08 3.4 INSTALLING THE 6H122-08 INTO THE 6C105 CHASSIS 3.3 INSTALLING OPTIONSor components engages the backplane connectors To prevent damaging the backplane connectors in the followingstep, take care that the module slides in straight and properly RESET Chapter 3 InstallationFigure 3-1 Installing an Interface Module 6H122-08 User’s Guide3.5 CONNECTING TO THE NETWORK 3.5.1 Connecting Twisted Pair Cables to Ports 1 ThroughRX Receive LED Column Figure 3-2 6H122-08 Twisted Pair Connection3.5.2 Connecting a Twisted Pair Segment to the FE-100TX Figure 3-3 Cable Pinouts - RJ45 Crossover CableFigure 3-4 FE-100TX Crossover Switch 100 FE-100TX3.5.3 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3 Fiber Optic Network ConnectionThe port RX LED ﬂashes green and amber during bootup Figure 3-5 FE-100FX and FE-100F3 Port6H122-08 User’s Guide 3.6 COMPLETING THE INSTALLATIONCompleting the Installation 3-113-12 Chapter 3 Installation6H122-08 User’s Guide CHAPTER TROUBLESHOOTING 4.1 USING LANVIEW6H122-08 User’s Guide Chapter 4 Troubleshooting6H122-08 RESET Figure 4-1 LANVIEW LEDsTable 4-1 LANVIEW LEDs Using LANVIEW6H122-08 User’s Guide ColorTable 4-1 LANVIEW LEDs Continued 4.2 FE-100TX LEDTable 4-2 Port 1-6 10/100 LED Indications FE-100TX LED 100 LEDReceive RX LED 6H122-08 User’s GuideTable 4-4 Troubleshooting Checklist 4.3 TROUBLESHOOTING CHECKLISTChapter 4 Troubleshooting Problem4.4 USING THE RESET BUTTON 6H122-08Chapter 4 Troubleshooting 6H122-08 User’s GuideCHAPTER LOCAL MANAGEMENT 5.1 OVERVIEW6H122-08 User’s Guide 5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONSChapter 5 Local Management Table 5-1 Keyboard Conventions5.3 MANAGEMENT TERMINAL SETUP 5.3.1 Console Cable ConnectionRESET UTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter to PCRESET Chapter 5 Local Management5.3.2 Connecting an Uninterruptible Power Supply 6H122-08 RESET CPU 100 Mbs Figure 5-2 Uninterruptible Power Supply UPSUTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter DB9 Port RESETTable 5-2 VT Terminal Setup 5.3.3 Management Terminal Setup ParametersManagement Terminal Setup Display Setup MenuTelnet Connections 5.4 ACCESSING LOCAL MANAGEMENT Figure 5-3 The Local Management Chassis/Module Password Screen5.4.1 Navigating Local Management Screens Figure 5-5 802.1Q Switching Mode, LM Screen Hierarchy Accessing Local ManagementFigure 5-4 802.1D Switching Mode, LM Screen Hierarchy 6H122-08 User’s Guide5.4.2 Selecting Local Management Menu Screen Items 5.4.3 Exiting Local Management Screens5. Press ENTER. The Password screen displays and the session ends 5.5 THE MAIN MENU SCREEN CHASSIS5.6 CHASSIS MENU SCREEN MODULES802.1Q VLAN CONFIGURATION 5.7 CHASSIS CONFIGURATION SCREENCHASSIS CONFIGURATION SNMP COMMUNITY NAMESThe following brieﬂy explains each Chassis Conﬁguration screen ﬁeld Chassis Date Modiﬁable SectionSubnet Mask Modiﬁable Chassis Time Modiﬁable5.7.1 Setting the IP Address 5.7.2 Setting the Subnet Mask 5.7.3 Setting the Chassis Date 5.7.4 Setting the Chassis Time5.7.6 Setting the Screen Lockout Time 5.7.5 Entering a New Screen Refresh Time5.7.7 Setting the Operational Mode 5.8 SNMP COMMUNITY NAMES SCREEN The following explains each SNMP Community Names screen ﬁeld 5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN 5.9.1 Conﬁguring the Trap Table Enable Traps TogglePower Supply #X Status Read-Only 5.10 CHASSIS ENVIRONMENTAL SCREENChassis Power Redundancy Read-Only Chassis Fan Status Read-Only5.11 PORT REDIRECT FUNCTION SCREEN Displays which modules are currently set as source modules 5.11.1 Displaying the Source and Destination Entries 5.11.2 Changing Source and Destination Ports 5.12 MODULE SELECTION SCREEN Module Type Read-only5.12.1 Selecting a Module 5.13 MODULE MENU SCREEN MODULE CONFIGURATIONMODULE STATISTICS 5.14 MODULE CONFIGURATION MENU SCREENNETWORK TOOLS GENERAL CONFIGURATION Figure 5-17 Module Conﬁguration Menu ScreenSMARTTRUNK CONFIGURATION SWITCH CONFIGURATIONETHERNET INTERFACE CONFIGURATION MODULE SPECIFIC CONFIGURATION5.15 GENERAL CONFIGURATION SCREEN Subnet Mask Modiﬁable Default Gateway ModiﬁableIP Address Modiﬁable TFTP Gateway IP Addr ModiﬁableContains the maximum number of minutes that the Local Management application displays a module’s screen while awaiting input or action from a user. For example, if the number 5 is entered in this ﬁeld, the user has up to ﬁve minutes to respond to each of the speciﬁed module’s Local Management screens. In this example, after ﬁve minutes of “idleness” no input or action, the terminal “beeps” ﬁve times, the Local Management application terminates the session, and the display returns to the Password screen. To enter a new lockout time, refer to Section This ﬁeld toggles between DISTRIBUTED and STAND ALONE Clear NVRAM Toggle 5.15.1 Setting the IP AddressIP Fragmentation Toggle 5.15.2 Setting the Subnet Mask 5.15.3 Setting the Default Gateway 5.15.4 Setting the TFTP Gateway IP Address5.15.5 Setting the Module Date 5.15.6 Setting the Module Time 5.15.7 Entering a New Screen Refresh Time5.15.8 Setting the Screen Lockout Time 5.15.9 Setting the Operational Mode5.15.10 Setting the Management Mode 802.1D SWITCHING, 802.1Q SWITCHING, or SECURE FAST VLAN5.15.11 Conﬁguring the COM Port 3. Use the arrow keys to highlight YES. Press ENTER 5.15.12 Changing the Com Port Application 5.15.13 Clearing NVRAM 5.15.14 Enabling/Disabling IP Fragmentation 5.16 SNMP COMMUNITY NAMES SCREENaccess to security-protected ﬁelds of read-write Figure 5-22 SNMP Community Names Screen5.16.1 Establishing Community Names 5.17 SNMP TRAPS SCREEN Figure 5-23 SNMP Traps Screen5.17.1 Conﬁguring the Trap Table 5.18 SWITCH CONFIGURATION SCREEN The following describe each ﬁeld of the Switch Conﬁguration screen 5.18.1 Setting the STA 5.18.2 Setting the Age Time 5.18.3 Setting Enabling or Disabling the Port Status5.19 ETHERNET INTERFACE CONFIGURATION Desired Oper. Mode Selectable Current Oper. Mode Read-onlyLink Status Read-Only 5.19.2 Setting the FE-100TX Operational Mode 5.19.1 Conﬁguring an FE-100TX Interface5.19.3 Setting the FE-100TX Advertised Ability 5.19.5 Setting the FE-100FX and FE-100F3 in Operational Mode 5.19.4 Conﬁguring an FE-100FX or FE-100F3 Interface for Port 7 or5.20 MODULE SPECIFIC CONFIGURATION MENU SCREEN PORT REDIRECT FUNCTIONFigure 5-26 Module Speciﬁc Conﬁguration Menu Screen The Broadcast Suppression screen allows the user to set a desired limit of receive broadcast frames per port per second. For details, refer to Section 5.21 SYSTEM RESOURCES SCREEN NVRAM Installed Read-only 5.21.1 Setting the Reset Peak UtilizationDRAM Installed Read-only Current Switch Utilization Read-only5.22 FLASH DOWNLOAD SCREEN Figure 5-28 Flash Download ScreenThe following brieﬂy explains each ﬁeld of the Flash Download screen 5.22.1 Image File Download Using TFTP 5.22.2 Image File Download Using RUNTIME 5.22.3 Image File Download Using BootP 5.23 PORT REDIRECT FUNCTION SCREENFigure 5-29 Port Redirect Function Screen 5.23.1 Changing Source and Destination Ports 5.24 BROADCAST SUPPRESSION SCREEN Figure 5-30 Broadcast Suppression ScreenReset Peak Toggle 5.24.1 Setting the ThresholdTime Since Peak Read-Only 5.25 MODULE STATISTICS MENU SCREEN 5.24.2 Setting the Reset Peak SwitchSWITCH STATISTICS The Module Statistics Menu screen displays the following menu items 5.26 SWITCH STATISTICS SCREEN Figure 5-32 Switch Statistics Screen5.26.1 Using the Clear Counters Command 5.27 THE INTERFACE STATISTICS SCREEN Interface Read-onlyInOctets Read-only InErrors Read-onlyName Read-only InUnicast Read-onlyOutNonUnicast Read-only OutErrors Read-onlyAdmin Status Read-only OutDiscards Read-only5.27.2 Using the Clear Counters Command 5.27.1 Displaying Interface Statistics5.28 RMON STATISTICS SCREEN Figure 5-34 RMON Statistics ScreenThis ﬁeld displays the name of the entity that conﬁgured this entry Undersized Pkts Read-only CRC Align Errors Read-onlyMulticasts Read-only Oversized Pkts Read-onlyTotal Octets Read-only Index XX CommandCLEAR COUNTERS Command 64 Octets Read-only5.28.2 Using the Clear Counters Command 5.28.1 Displaying RMON Statistics5.29 NETWORK TOOLS Syntax 5.29.1 Built-in Commandscommand DescriptionOptions 1 - Other 2 - Invalid entry cannot ping device, timed out, etcExample Description bridge ENABLE/DISABLE IFNUM/ALLSyntax Optionsdevice through the speciﬁed interface set or delete the default IP route to a manageddefroute interface number IP address Not ApplicableOptions SyntaxDescription Examplereset Syntaxresetreset OptionsOptions SyntaxDescription ExampleOptions SyntaxDescription ExampleDescription Syntaxtelnet IP address Port # OptionsSyntax 5.29.2 Special Commandslinktrap DescriptionA.2 PHYSICAL PROPERTIES APPENDIX A SPECIFICATIONSA.1 DEVICE SPECIFICATIONS A.3 ENVIRONMENTAL REQUIREMENTSA.4 INPUT/OUTPUT PORTS A.5 COM PORT PINOUT ASSIGNMENTSSafety A.6 REGULATORY COMPLIANCEElectromagnetic Compatibility EMC Appendix A Speciﬁcations 6H122-08 User’s GuideAPPENDIX B FE-100TX, FE-100FX AND FE-100F3 SPECIFICATIONS B.1 FE-100TXAppendix B FE-100TX, FE-100FX and FE-100F3 Speciﬁcations B.2 FE-100FX6H122-08 User’s Guide 6H122-08 User’s Guide B.3 FE-100F3FE-100F3 FE-100F3Appendix B FE-100TX, FE-100FX and FE-100F3 Speciﬁcations 6H122-08 User’s GuideC.2 SETTING THE MODE SWITCH APPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGSC.1 REQUIRED TOOLS Switch deﬁnitions and positions are as follows Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on the next power up. ALL user entered parameters, such as IP addresses, subnet masks, SNMP traps, and switching functions are restored to their factory default settings Figure C-2 6H122-08 Fast Ethernet Interface Module Connector Location C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULESAppendix C Optional Installations and Mode Switch Bank Settings Optional Fast Ethernet Interface Modules ConnectorsTo install a Fast Ethernet Interface Module in port slot 7 or 8 of the 2. Remove the screw from the rear standoff. Save the screw 7. Installation is complete Appendix C Optional Installations and Mode Switch Bank Settings 6H122-08 User’s Guide6H122-08 User’s Guide INDEXNumerics Index-1Index-2 Index6H122-08 User’s Guide 6H122-08 User’s Guide IndexIndex-3 Index-4 Index6H122-08 User’s Guide