Cabletron Systems 6H122-08 Displaying Interface Statistics, Using the Clear Counters Command

Chapter 5: Local Management

Link Status (Read-only)

This field displays the current link status of the interface. This field will read either “Link” or “No Link”.

Duplex Mode (Read-only)

This field indicates whether the interface is operating in normal or full duplex mode. This field will read either “Standard” or “Full Duplex”.

Interface [XX] (Command)

This command is used to enter an interface number for viewing statistics. For instructions on how to use this command, refer to Section 5.27.1.

CLEAR COUNTERS (Command)

This command is used to reset all statistic counters to zero. For details on how to use this field, refer to Section 5.27.2.

5.27.1 Displaying Interface Statistics

To display the statistics for any interface, proceed as follows:

1.Use the arrow keys to highlight the Interface [XX] field at the bottom of the screen.

2.Press the SPACE bar to increment (or press the DEL (delete) key to decrement) the interface number.

3.Press ENTER (neither the Interface # fields nor the statistics will change until ENTER is pressed).

5.27.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform the following steps:

1.Use the arrow keys to highlight the CLEAR COUNTERS command.

2.Press ENTER, the counters for the selected interface are reset to zero.

5-90 6H122-08 User’s Guide