Cabletron Systems manual Contents, 6H122-08 User’s Guide

		Contents
5.12	Module Selection Screen	5-34
	5.12.1 Selecting a Module	5-35
5.13	Module Menu Screen	5-36
5.14	Module Configuration Menu Screen	5-37
5.15	General Configuration Screen	5-40
	5.15.1 Setting the IP Address	5-44
	5.15.2 Setting the Subnet Mask	5-45
	5.15.3 Setting the Default Gateway	5-46
	5.15.4 Setting the TFTP Gateway IP Address	5-46
	5.15.5 Setting the Module Date	5-47
	5.15.6 Setting the Module Time	5-48
	5.15.7 Entering a New Screen Refresh Time	5-48
	5.15.8 Setting the Screen Lockout Time	5-49
	5.15.9 Setting the Operational Mode	5-49
	5.15.10 Setting the Management Mode	5-50
	5.15.11 Configuring the COM Port	5-51
	5.15.12 Changing the Com Port Application	5-53
	5.15.13 Clearing NVRAM	5-54
	5.15.14 Enabling/Disabling IP Fragmentation	5-55
5.16	SNMP Community Names Screen	5-55
	5.16.1 Establishing Community Names	5-57
5.17	SNMP Traps Screen	5-58
	5.17.1 Configuring the Trap Table	5-59
5.18	Switch Configuration Screen	5-60
	5.18.1 Setting the STA	5-62
	5.18.2 Setting the Age Time	5-63
	5.18.3 Setting (Enabling or Disabling) the Port Status	5-63
5.19	Ethernet Interface Configuration	5-64
	5.19.1 Configuring an FE-100TX Interface	5-66
	5.19.2 Setting the FE-100TX Operational Mode	5-66
	5.19.3 Setting the FE-100TX Advertised Ability	5-67
	5.19.4 Configuring an FE-100FX or FE-100F3
	Interface for Port 7 or 8	5-68
	5.19.5 Setting the FE-100FX and FE-100F3
	in Operational Mode	5-68
5.20	Module Specific Configuration Menu Screen	5-69
5.21	System Resources Screen	5-72
	5.21.1 Setting the Reset Peak Utilization	5-73
5.22	Flash Download Screen	5-74
	5.22.1 Image File Download Using TFTP	5-76
	5.22.2 Image File Download Using RUNTIME	5-77
	5.22.3 Image File Download Using BootP	5-78

6H122-08 User’s Guide vii