Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems 6H122-08 Module Configuration Menu Screen, Module Statistics, Network Tools

Models: 6H122-08

1 170

Download 170 pages 13.93 Kb

Page 81

MODULE STATISTICS

Module Conﬁguration Menu Screen

MODULE STATISTICS

The Module Statistics screen provides statistics and performance information for the 6H122-08. For details about this screen, refer to Section 5.25.

NETWORK TOOLS

The Network Tools function resides on the 6H122-08 and consists of a series of commands that allow the user to access and manage network devices. Section 5.29 explains how to use the Network Tools utility.

5.14MODULE CONFIGURATION MENU SCREEN

The Module Conﬁguration Menu screen, Figure 5-17, provides access to Local Management screens that allow you to conﬁgure and monitor operating parameters, modify SNMP community names, set SNMP traps, conﬁgure switch parameters and conﬁgure 6H122-08 ports.

NOTE

The following menu items on the Module Conﬁguration Menu screen may not display if the operational mode of the module has been set to SECURE FAST VLAN:

SWITCH CONFIGURATION

SMARTTRUNK CONFIGURATION

Refer to your Release Notes to see if the functionality provided by the above screens is supported in SECURE FAST VLAN mode.

Section 5.15.9 provides instructions on setting the operational mode.

Access the Module Conﬁguration Menu screen from the Module Menu screen by using the arrow keys to highlight the MODULE CONFIGURATION menu item and pressing ENTER. The Module Conﬁguration screen displays.

6H122-08 User’s Guide

5-37

Image 81

Cabletron Systems 6H122-08 manual Module Configuration Menu Screen, Module Statistics, Network Tools

Contents

6H122-08 RESET 6H122-08 SmartSwitch 6000 Interface Module User’s Guide1X 2X 3X 4X 5X 6X CPU 100 MbsPage 6H122-08 User’s Guide FCC NOTICEVCCI NOTICE INDUSTRY CANADA NOTICECABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT 6H122-08 User’s GuideCABLETRON SOFTWARE PROGRAM LICENSE EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITYUNITED STATES GOVERNMENT RESTRICTED RIGHTS 6H122-08 User’s Guide6H122-08 User’s Guide DECLARATION OF CONFORMITYINSTALLATION CONTENTSCHAPTER INTRODUCTIONTROUBLESHOOTING ContentsCHAPTER CHAPTER6H122-08 User’s Guide ContentsSPECIFICATIONS ContentsSPECIFICATIONS OPTIONAL INSTALLATIONS AND1.1 USING THIS GUIDE CHAPTER INTRODUCTION1.2 STRUCTURE OF THIS GUIDE Chapter 1 Introduction RESET Reset Button COM Port System LED Port Status LEDs Network PortsStructure of This Guide 6H122-08 User’s Guide1.3 6H122-08 OVERVIEW 1.3.1 Auto-Negotiation1.3.2 Connectivity 1.3.5 Switching Options 1.3.3 Full Duplex Switched Ethernet FDSE1.3.4 Management 1.3.6 Standards Compatibility1.3.7 LANVIEW Diagnostic LEDs 1.3.8 Year 2000 Compliant1.3.9 Runtime IP Address Discovery 1.4.1 Distributed Chassis Management 1.4 LOCAL MANAGEMENT FEATURES1.4.2 Remote Monitoring RMON 1.4.3 Broadcast Suppression1.4.5 SmartTrunk 1.4.4 Port Redirect Function1.4.6 Additional Local Management Functions 1.5 OPTIONAL FEATURESThe following conventions are used throughout this document 1.6 DOCUMENT CONVENTIONSChapter 1 Introduction 1-101.7 GETTING HELP The following manuals may help the user to setup and manage the 1.8 RELATED MANUALS6H122-08 Cabletron Systems Cabling GuideCHAPTER NETWORK REQUIREMENTS 2.1 SmartTrunk2.2 10BASE-T NETWORK 2.4 100BASE-FX FIBER OPTIC NETWORK 2.3 100BASE-TX NETWORKMultimode Mode Fiber Optic Cable Length Single Mode Fiber Cable LengthsCHAPTER INSTALLATION 3.1 REQUIRED TOOLS3.2 UNPACKING THE 6H122-08 3.3 INSTALLING OPTIONS 3.4 INSTALLING THE 6H122-08 INTO THE 6C105 CHASSISor components To prevent damaging the backplane connectors in the following engages the backplane connectorsstep, take care that the module slides in straight and properly Figure 3-1 Installing an Interface Module Chapter 3 InstallationRESET 6H122-08 User’s Guide3.5.1 Connecting Twisted Pair Cables to Ports 1 Through 3.5 CONNECTING TO THE NETWORKFigure 3-2 6H122-08 Twisted Pair Connection RX Receive LED ColumnFigure 3-3 Cable Pinouts - RJ45 Crossover Cable 3.5.2 Connecting a Twisted Pair Segment to the FE-100TX100 FE-100TX Figure 3-4 FE-100TX Crossover SwitchFiber Optic Network Connection 3.5.3 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3Figure 3-5 FE-100FX and FE-100F3 Port The port RX LED ﬂashes green and amber during bootupCompleting the Installation 3.6 COMPLETING THE INSTALLATION6H122-08 User’s Guide 3-11Chapter 3 Installation 3-126H122-08 User’s Guide 4.1 USING LANVIEW CHAPTER TROUBLESHOOTING6H122-08 RESET Chapter 4 Troubleshooting6H122-08 User’s Guide Figure 4-1 LANVIEW LEDs6H122-08 User’s Guide Using LANVIEWTable 4-1 LANVIEW LEDs Color4.2 FE-100TX LED Table 4-1 LANVIEW LEDs ContinuedTable 4-2 Port 1-6 10/100 LED Indications Receive RX LED 100 LEDFE-100TX LED 6H122-08 User’s GuideChapter 4 Troubleshooting 4.3 TROUBLESHOOTING CHECKLISTTable 4-4 Troubleshooting Checklist Problem6H122-08 4.4 USING THE RESET BUTTON6H122-08 User’s Guide Chapter 4 Troubleshooting5.1 OVERVIEW CHAPTER LOCAL MANAGEMENTChapter 5 Local Management 5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONS6H122-08 User’s Guide Table 5-1 Keyboard Conventions5.3.1 Console Cable Connection 5.3 MANAGEMENT TERMINAL SETUPRESET UTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter to PCRESET Chapter 5 Local Management5.3.2 Connecting an Uninterruptible Power Supply UTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter DB9 Port Figure 5-2 Uninterruptible Power Supply UPS6H122-08 RESET CPU 100 Mbs RESETManagement Terminal Setup 5.3.3 Management Terminal Setup ParametersTable 5-2 VT Terminal Setup Display Setup MenuTelnet Connections Figure 5-3 The Local Management Chassis/Module Password Screen 5.4 ACCESSING LOCAL MANAGEMENT5.4.1 Navigating Local Management Screens Figure 5-4 802.1D Switching Mode, LM Screen Hierarchy Accessing Local ManagementFigure 5-5 802.1Q Switching Mode, LM Screen Hierarchy 6H122-08 User’s Guide5.4.3 Exiting Local Management Screens 5.4.2 Selecting Local Management Menu Screen Items5. Press ENTER. The Password screen displays and the session ends CHASSIS 5.5 THE MAIN MENU SCREENMODULES 5.6 CHASSIS MENU SCREENCHASSIS CONFIGURATION 5.7 CHASSIS CONFIGURATION SCREEN802.1Q VLAN CONFIGURATION SNMP COMMUNITY NAMESThe following brieﬂy explains each Chassis Conﬁguration screen ﬁeld Subnet Mask Modiﬁable SectionChassis Date Modiﬁable Chassis Time Modiﬁable5.7.1 Setting the IP Address 5.7.2 Setting the Subnet Mask 5.7.4 Setting the Chassis Time 5.7.3 Setting the Chassis Date5.7.5 Entering a New Screen Refresh Time 5.7.6 Setting the Screen Lockout Time5.7.7 Setting the Operational Mode 5.8 SNMP COMMUNITY NAMES SCREEN The following explains each SNMP Community Names screen ﬁeld 5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN Enable Traps Toggle 5.9.1 Conﬁguring the Trap TableChassis Power Redundancy Read-Only 5.10 CHASSIS ENVIRONMENTAL SCREENPower Supply #X Status Read-Only Chassis Fan Status Read-Only5.11 PORT REDIRECT FUNCTION SCREEN Displays which modules are currently set as source modules 5.11.1 Displaying the Source and Destination Entries 5.11.2 Changing Source and Destination Ports Module Type Read-only 5.12 MODULE SELECTION SCREEN5.12.1 Selecting a Module MODULE CONFIGURATION 5.13 MODULE MENU SCREEN5.14 MODULE CONFIGURATION MENU SCREEN MODULE STATISTICSNETWORK TOOLS Figure 5-17 Module Conﬁguration Menu Screen GENERAL CONFIGURATIONETHERNET INTERFACE CONFIGURATION SWITCH CONFIGURATIONSMARTTRUNK CONFIGURATION MODULE SPECIFIC CONFIGURATION5.15 GENERAL CONFIGURATION SCREEN IP Address Modiﬁable Default Gateway ModiﬁableSubnet Mask Modiﬁable TFTP Gateway IP Addr ModiﬁableContains the maximum number of minutes that the Local Management application displays a module’s screen while awaiting input or action from a user. For example, if the number 5 is entered in this ﬁeld, the user has up to ﬁve minutes to respond to each of the speciﬁed module’s Local Management screens. In this example, after ﬁve minutes of “idleness” no input or action, the terminal “beeps” ﬁve times, the Local Management application terminates the session, and the display returns to the Password screen. To enter a new lockout time, refer to Section This ﬁeld toggles between DISTRIBUTED and STAND ALONE 5.15.1 Setting the IP Address Clear NVRAM ToggleIP Fragmentation Toggle 5.15.2 Setting the Subnet Mask 5.15.4 Setting the TFTP Gateway IP Address 5.15.3 Setting the Default Gateway5.15.5 Setting the Module Date 5.15.7 Entering a New Screen Refresh Time 5.15.6 Setting the Module Time5.15.9 Setting the Operational Mode 5.15.8 Setting the Screen Lockout Time802.1D SWITCHING, 802.1Q SWITCHING, or SECURE FAST VLAN 5.15.10 Setting the Management Mode5.15.11 Conﬁguring the COM Port 3. Use the arrow keys to highlight YES. Press ENTER 5.15.12 Changing the Com Port Application 5.15.13 Clearing NVRAM 5.16 SNMP COMMUNITY NAMES SCREEN 5.15.14 Enabling/Disabling IP FragmentationFigure 5-22 SNMP Community Names Screen access to security-protected ﬁelds of read-write5.16.1 Establishing Community Names Figure 5-23 SNMP Traps Screen 5.17 SNMP TRAPS SCREEN5.17.1 Conﬁguring the Trap Table 5.18 SWITCH CONFIGURATION SCREEN The following describe each ﬁeld of the Switch Conﬁguration screen 5.18.1 Setting the STA 5.18.3 Setting Enabling or Disabling the Port Status 5.18.2 Setting the Age Time5.19 ETHERNET INTERFACE CONFIGURATION Current Oper. Mode Read-only Desired Oper. Mode SelectableLink Status Read-Only 5.19.1 Conﬁguring an FE-100TX Interface 5.19.2 Setting the FE-100TX Operational Mode5.19.3 Setting the FE-100TX Advertised Ability 5.19.4 Conﬁguring an FE-100FX or FE-100F3 Interface for Port 7 or 5.19.5 Setting the FE-100FX and FE-100F3 in Operational ModePORT REDIRECT FUNCTION 5.20 MODULE SPECIFIC CONFIGURATION MENU SCREENFigure 5-26 Module Speciﬁc Conﬁguration Menu Screen The Broadcast Suppression screen allows the user to set a desired limit of receive broadcast frames per port per second. For details, refer to Section 5.21 SYSTEM RESOURCES SCREEN DRAM Installed Read-only 5.21.1 Setting the Reset Peak UtilizationNVRAM Installed Read-only Current Switch Utilization Read-onlyFigure 5-28 Flash Download Screen 5.22 FLASH DOWNLOAD SCREENThe following brieﬂy explains each ﬁeld of the Flash Download screen 5.22.1 Image File Download Using TFTP 5.22.2 Image File Download Using RUNTIME 5.23 PORT REDIRECT FUNCTION SCREEN 5.22.3 Image File Download Using BootPFigure 5-29 Port Redirect Function Screen 5.23.1 Changing Source and Destination Ports Figure 5-30 Broadcast Suppression Screen 5.24 BROADCAST SUPPRESSION SCREEN5.24.1 Setting the Threshold Reset Peak ToggleTime Since Peak Read-Only 5.24.2 Setting the Reset Peak Switch 5.25 MODULE STATISTICS MENU SCREENSWITCH STATISTICS The Module Statistics Menu screen displays the following menu items Figure 5-32 Switch Statistics Screen 5.26 SWITCH STATISTICS SCREEN5.26.1 Using the Clear Counters Command Interface Read-only 5.27 THE INTERFACE STATISTICS SCREENName Read-only InErrors Read-onlyInOctets Read-only InUnicast Read-onlyAdmin Status Read-only OutErrors Read-onlyOutNonUnicast Read-only OutDiscards Read-only5.27.1 Displaying Interface Statistics 5.27.2 Using the Clear Counters CommandFigure 5-34 RMON Statistics Screen 5.28 RMON STATISTICS SCREENThis ﬁeld displays the name of the entity that conﬁgured this entry Multicasts Read-only CRC Align Errors Read-onlyUndersized Pkts Read-only Oversized Pkts Read-onlyCLEAR COUNTERS Command Index XX CommandTotal Octets Read-only 64 Octets Read-only5.28.1 Displaying RMON Statistics 5.28.2 Using the Clear Counters Command5.29 NETWORK TOOLS command 5.29.1 Built-in CommandsSyntax Description1 - Other 2 - Invalid entry cannot ping device, timed out, etc OptionsExample Syntax bridge ENABLE/DISABLE IFNUM/ALLDescription Optionsdefroute interface number IP address set or delete the default IP route to a manageddevice through the speciﬁed interface Not ApplicableDescription SyntaxOptions Examplereset Syntaxresetreset OptionsDescription SyntaxOptions ExampleDescription SyntaxOptions Exampletelnet IP address Port # SyntaxDescription Optionslinktrap 5.29.2 Special CommandsSyntax DescriptionA.1 DEVICE SPECIFICATIONS APPENDIX A SPECIFICATIONSA.2 PHYSICAL PROPERTIES A.3 ENVIRONMENTAL REQUIREMENTSA.5 COM PORT PINOUT ASSIGNMENTS A.4 INPUT/OUTPUT PORTSA.6 REGULATORY COMPLIANCE SafetyElectromagnetic Compatibility EMC 6H122-08 User’s Guide Appendix A SpeciﬁcationsB.1 FE-100TX APPENDIX B FE-100TX, FE-100FX AND FE-100F3 SPECIFICATIONSB.2 FE-100FX Appendix B FE-100TX, FE-100FX and FE-100F3 Speciﬁcations6H122-08 User’s Guide FE-100F3 B.3 FE-100F36H122-08 User’s Guide FE-100F36H122-08 User’s Guide Appendix B FE-100TX, FE-100FX and FE-100F3 SpeciﬁcationsAPPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGS C.2 SETTING THE MODE SWITCHC.1 REQUIRED TOOLS Switch deﬁnitions and positions are as follows Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on the next power up. ALL user entered parameters, such as IP addresses, subnet masks, SNMP traps, and switching functions are restored to their factory default settings Appendix C Optional Installations and Mode Switch Bank Settings C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULESFigure C-2 6H122-08 Fast Ethernet Interface Module Connector Location Optional Fast Ethernet Interface Modules ConnectorsTo install a Fast Ethernet Interface Module in port slot 7 or 8 of the 2. Remove the screw from the rear standoff. Save the screw 7. Installation is complete 6H122-08 User’s Guide Appendix C Optional Installations and Mode Switch Bank SettingsNumerics INDEX6H122-08 User’s Guide Index-1Index Index-26H122-08 User’s Guide Index 6H122-08 User’s GuideIndex-3 Index Index-46H122-08 User’s Guide