Cabletron Systems 6H122-08 manual 29 Port Redirect Function Screen

Port Redirect Function Screen

Access the Port Redirect Function screen from the Module Specific Configuration Menu screen by using the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and pressing ENTER. The Port Redirect Function screen displays.

Event Message Line

	6H122-08 LOCAL MANAGEMENT
	Port Redirect Function
Module Type: 6H122-08		Firmware Revision:	XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
Source Port:	Destination Port:	Remap Errors:
============	============	============
1	5	ON
2	6	ON
1	6	OFF
Source Port [1]	Destination Port [1]	Errors [ON]	Status [ADD]
			RETURN
SAVE		EXIT		RETURN

2159_26

Figure 5-29 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

Remap Errors (Read-only)

Displays whether the corresponding source ports are configured to send errored frames to the destination ports, or to drop all errored frames before forwarding traffic.

Source Port [n] (Selectable)

Allows a selected port [n] to be changed to a source port.

Destination Port [n] (Selectable)

Allows a selected port [n] to be changed to a destination port.

6H122-08 User’s Guide 5-79