Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems 6H122-08 The following brieﬂy explains each ﬁeld of the Flash Download screen

Models: 6H122-08

1 170

Download 170 pages 13.93 Kb

Page 119

The following brieﬂy explains each ﬁeld of the Flash Download screen:

Flash Download Screen

NOTE

Download Server IP and Download Server Filename are displayed only when TFTP or RUNTIME are selected in Download Method.

The following brieﬂy explains each ﬁeld of the Flash Download screen:

Download Method (Selectable)

This ﬁeld steps through TFTP, RUNTIME and BOOTP. If set for BOOTP, the module sends out a BootP request to determine the IP address of the TFTP server and the ﬁlename of the image to be downloaded. If set for TFTP or RUNTIME, the 6H122-08 attempts a TFTP download based on the IP address and ﬁlename entered in the ﬁelds at the bottom of the Flash Download screen. Section 5.22.1 describes how to download using TFTP. Section 5.22.2 describes how to download using RUNTIME. Section 5.22.3 describes how to download using BootP.

Reboot After Download (Modiﬁable whenRUNTIME is chosen only)

This ﬁeld notiﬁes the user that the 6H122-08 will reboot after the download is complete. If a RUNTIME Download is performed, this ﬁeld toggles between YES and NO. If YES is selected, the module reboots after the download is completed. If NO is selected the module continues using the existing the ﬁrmware image. The module stores the new ﬁrmware image in FLASH memory. When the module or 6C105 chassis is reset, the module will boot from FLASH memory using the new image.

TFTP Gateway IP Addr (Selectable)

This ﬁeld shows the IP address of the TFTP gateway server deﬁned in the General Conﬁguration screen in Section 5.15.4.

Last Image Server IP (Read-only)

This ﬁeld shows the IP address of the server used for the previous FLASH Download.

Last Image File Name (Read-only)

This ﬁeld shows the complete path and ﬁle name of the last image downloaded to FLASH.

6H122-08 User’s Guide

5-75

Image 119

Cabletron Systems 6H122-08 manual The following brieﬂy explains each ﬁeld of the Flash Download screen

Contents

CPU 100 Mbs 6H122-08 SmartSwitch 6000 Interface Module User’s Guide6H122-08 RESET 1X 2X 3X 4X 5X 6XPage 6H122-08 User’s Guide FCC NOTICE6H122-08 User’s Guide INDUSTRY CANADA NOTICEVCCI NOTICE CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT6H122-08 User’s Guide EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITYCABLETRON SOFTWARE PROGRAM LICENSE UNITED STATES GOVERNMENT RESTRICTED RIGHTS6H122-08 User’s Guide DECLARATION OF CONFORMITYINTRODUCTION CONTENTSINSTALLATION CHAPTERCHAPTER ContentsTROUBLESHOOTING CHAPTER6H122-08 User’s Guide ContentsOPTIONAL INSTALLATIONS AND ContentsSPECIFICATIONS SPECIFICATIONS1.2 STRUCTURE OF THIS GUIDE 1.1 USING THIS GUIDECHAPTER INTRODUCTION Chapter 1 Introduction 6H122-08 User’s Guide Reset Button COM Port System LED Port Status LEDs Network PortsRESET Structure of This Guide1.3.2 Connectivity 1.3 6H122-08 OVERVIEW1.3.1 Auto-Negotiation 1.3.6 Standards Compatibility 1.3.3 Full Duplex Switched Ethernet FDSE1.3.5 Switching Options 1.3.4 Management1.3.9 Runtime IP Address Discovery 1.3.7 LANVIEW Diagnostic LEDs1.3.8 Year 2000 Compliant 1.4.3 Broadcast Suppression 1.4 LOCAL MANAGEMENT FEATURES1.4.1 Distributed Chassis Management 1.4.2 Remote Monitoring RMON1.4.5 SmartTrunk 1.4.4 Port Redirect Function1.4.6 Additional Local Management Functions 1.5 OPTIONAL FEATURES1-10 1.6 DOCUMENT CONVENTIONSThe following conventions are used throughout this document Chapter 1 Introduction1.7 GETTING HELP Cabletron Systems Cabling Guide 1.8 RELATED MANUALSThe following manuals may help the user to setup and manage the 6H122-082.2 10BASE-T NETWORK CHAPTER NETWORK REQUIREMENTS2.1 SmartTrunk Single Mode Fiber Cable Lengths 2.3 100BASE-TX NETWORK2.4 100BASE-FX FIBER OPTIC NETWORK Multimode Mode Fiber Optic Cable Length3.2 UNPACKING THE 6H122-08 CHAPTER INSTALLATION3.1 REQUIRED TOOLS or components 3.3 INSTALLING OPTIONS3.4 INSTALLING THE 6H122-08 INTO THE 6C105 CHASSIS step, take care that the module slides in straight and properly To prevent damaging the backplane connectors in the followingengages the backplane connectors 6H122-08 User’s Guide Chapter 3 InstallationFigure 3-1 Installing an Interface Module RESET3.5.1 Connecting Twisted Pair Cables to Ports 1 Through 3.5 CONNECTING TO THE NETWORKFigure 3-2 6H122-08 Twisted Pair Connection RX Receive LED ColumnFigure 3-3 Cable Pinouts - RJ45 Crossover Cable 3.5.2 Connecting a Twisted Pair Segment to the FE-100TX100 FE-100TX Figure 3-4 FE-100TX Crossover SwitchFiber Optic Network Connection 3.5.3 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3Figure 3-5 FE-100FX and FE-100F3 Port The port RX LED ﬂashes green and amber during bootup3-11 3.6 COMPLETING THE INSTALLATIONCompleting the Installation 6H122-08 User’s Guide6H122-08 User’s Guide Chapter 3 Installation3-12 4.1 USING LANVIEW CHAPTER TROUBLESHOOTINGFigure 4-1 LANVIEW LEDs Chapter 4 Troubleshooting6H122-08 RESET 6H122-08 User’s GuideColor Using LANVIEW6H122-08 User’s Guide Table 4-1 LANVIEW LEDsTable 4-2 Port 1-6 10/100 LED Indications 4.2 FE-100TX LEDTable 4-1 LANVIEW LEDs Continued 6H122-08 User’s Guide 100 LEDReceive RX LED FE-100TX LEDProblem 4.3 TROUBLESHOOTING CHECKLISTChapter 4 Troubleshooting Table 4-4 Troubleshooting Checklist6H122-08 4.4 USING THE RESET BUTTON6H122-08 User’s Guide Chapter 4 Troubleshooting5.1 OVERVIEW CHAPTER LOCAL MANAGEMENTTable 5-1 Keyboard Conventions 5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONSChapter 5 Local Management 6H122-08 User’s Guide5.3.1 Console Cable Connection 5.3 MANAGEMENT TERMINAL SETUPChapter 5 Local Management UTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter to PCRESET RESET5.3.2 Connecting an Uninterruptible Power Supply RESET Figure 5-2 Uninterruptible Power Supply UPSUTP Cable with RJ45 Connectors RJ45-to-DB9 PC Adapter DB9 Port 6H122-08 RESET CPU 100 MbsDisplay Setup Menu 5.3.3 Management Terminal Setup ParametersManagement Terminal Setup Table 5-2 VT Terminal SetupTelnet Connections Figure 5-3 The Local Management Chassis/Module Password Screen 5.4 ACCESSING LOCAL MANAGEMENT5.4.1 Navigating Local Management Screens 6H122-08 User’s Guide Accessing Local ManagementFigure 5-4 802.1D Switching Mode, LM Screen Hierarchy Figure 5-5 802.1Q Switching Mode, LM Screen Hierarchy5.4.3 Exiting Local Management Screens 5.4.2 Selecting Local Management Menu Screen Items5. Press ENTER. The Password screen displays and the session ends CHASSIS 5.5 THE MAIN MENU SCREENMODULES 5.6 CHASSIS MENU SCREENSNMP COMMUNITY NAMES 5.7 CHASSIS CONFIGURATION SCREENCHASSIS CONFIGURATION 802.1Q VLAN CONFIGURATIONThe following brieﬂy explains each Chassis Conﬁguration screen ﬁeld Chassis Time Modiﬁable SectionSubnet Mask Modiﬁable Chassis Date Modiﬁable5.7.1 Setting the IP Address 5.7.2 Setting the Subnet Mask 5.7.4 Setting the Chassis Time 5.7.3 Setting the Chassis Date5.7.5 Entering a New Screen Refresh Time 5.7.6 Setting the Screen Lockout Time5.7.7 Setting the Operational Mode 5.8 SNMP COMMUNITY NAMES SCREEN The following explains each SNMP Community Names screen ﬁeld 5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN Enable Traps Toggle 5.9.1 Conﬁguring the Trap TableChassis Fan Status Read-Only 5.10 CHASSIS ENVIRONMENTAL SCREENChassis Power Redundancy Read-Only Power Supply #X Status Read-Only5.11 PORT REDIRECT FUNCTION SCREEN Displays which modules are currently set as source modules 5.11.1 Displaying the Source and Destination Entries 5.11.2 Changing Source and Destination Ports Module Type Read-only 5.12 MODULE SELECTION SCREEN5.12.1 Selecting a Module MODULE CONFIGURATION 5.13 MODULE MENU SCREENNETWORK TOOLS 5.14 MODULE CONFIGURATION MENU SCREENMODULE STATISTICS Figure 5-17 Module Conﬁguration Menu Screen GENERAL CONFIGURATIONMODULE SPECIFIC CONFIGURATION SWITCH CONFIGURATIONETHERNET INTERFACE CONFIGURATION SMARTTRUNK CONFIGURATION5.15 GENERAL CONFIGURATION SCREEN TFTP Gateway IP Addr Modiﬁable Default Gateway ModiﬁableIP Address Modiﬁable Subnet Mask ModiﬁableContains the maximum number of minutes that the Local Management application displays a module’s screen while awaiting input or action from a user. For example, if the number 5 is entered in this ﬁeld, the user has up to ﬁve minutes to respond to each of the speciﬁed module’s Local Management screens. In this example, after ﬁve minutes of “idleness” no input or action, the terminal “beeps” ﬁve times, the Local Management application terminates the session, and the display returns to the Password screen. To enter a new lockout time, refer to Section This ﬁeld toggles between DISTRIBUTED and STAND ALONE IP Fragmentation Toggle 5.15.1 Setting the IP AddressClear NVRAM Toggle 5.15.2 Setting the Subnet Mask 5.15.4 Setting the TFTP Gateway IP Address 5.15.3 Setting the Default Gateway5.15.5 Setting the Module Date 5.15.7 Entering a New Screen Refresh Time 5.15.6 Setting the Module Time5.15.9 Setting the Operational Mode 5.15.8 Setting the Screen Lockout Time802.1D SWITCHING, 802.1Q SWITCHING, or SECURE FAST VLAN 5.15.10 Setting the Management Mode5.15.11 Conﬁguring the COM Port 3. Use the arrow keys to highlight YES. Press ENTER 5.15.12 Changing the Com Port Application 5.15.13 Clearing NVRAM 5.16 SNMP COMMUNITY NAMES SCREEN 5.15.14 Enabling/Disabling IP FragmentationFigure 5-22 SNMP Community Names Screen access to security-protected ﬁelds of read-write5.16.1 Establishing Community Names Figure 5-23 SNMP Traps Screen 5.17 SNMP TRAPS SCREEN5.17.1 Conﬁguring the Trap Table 5.18 SWITCH CONFIGURATION SCREEN The following describe each ﬁeld of the Switch Conﬁguration screen 5.18.1 Setting the STA 5.18.3 Setting Enabling or Disabling the Port Status 5.18.2 Setting the Age Time5.19 ETHERNET INTERFACE CONFIGURATION Link Status Read-Only Current Oper. Mode Read-onlyDesired Oper. Mode Selectable 5.19.1 Conﬁguring an FE-100TX Interface 5.19.2 Setting the FE-100TX Operational Mode5.19.3 Setting the FE-100TX Advertised Ability 5.19.4 Conﬁguring an FE-100FX or FE-100F3 Interface for Port 7 or 5.19.5 Setting the FE-100FX and FE-100F3 in Operational ModePORT REDIRECT FUNCTION 5.20 MODULE SPECIFIC CONFIGURATION MENU SCREENFigure 5-26 Module Speciﬁc Conﬁguration Menu Screen The Broadcast Suppression screen allows the user to set a desired limit of receive broadcast frames per port per second. For details, refer to Section 5.21 SYSTEM RESOURCES SCREEN Current Switch Utilization Read-only 5.21.1 Setting the Reset Peak UtilizationDRAM Installed Read-only NVRAM Installed Read-onlyFigure 5-28 Flash Download Screen 5.22 FLASH DOWNLOAD SCREENThe following brieﬂy explains each ﬁeld of the Flash Download screen 5.22.1 Image File Download Using TFTP 5.22.2 Image File Download Using RUNTIME 5.23 PORT REDIRECT FUNCTION SCREEN 5.22.3 Image File Download Using BootPFigure 5-29 Port Redirect Function Screen 5.23.1 Changing Source and Destination Ports Figure 5-30 Broadcast Suppression Screen 5.24 BROADCAST SUPPRESSION SCREENTime Since Peak Read-Only 5.24.1 Setting the ThresholdReset Peak Toggle SWITCH STATISTICS 5.24.2 Setting the Reset Peak Switch5.25 MODULE STATISTICS MENU SCREEN The Module Statistics Menu screen displays the following menu items Figure 5-32 Switch Statistics Screen 5.26 SWITCH STATISTICS SCREEN5.26.1 Using the Clear Counters Command Interface Read-only 5.27 THE INTERFACE STATISTICS SCREENInUnicast Read-only InErrors Read-onlyName Read-only InOctets Read-onlyOutDiscards Read-only OutErrors Read-onlyAdmin Status Read-only OutNonUnicast Read-only5.27.1 Displaying Interface Statistics 5.27.2 Using the Clear Counters CommandFigure 5-34 RMON Statistics Screen 5.28 RMON STATISTICS SCREENThis ﬁeld displays the name of the entity that conﬁgured this entry Oversized Pkts Read-only CRC Align Errors Read-onlyMulticasts Read-only Undersized Pkts Read-only64 Octets Read-only Index XX CommandCLEAR COUNTERS Command Total Octets Read-only5.28.1 Displaying RMON Statistics 5.28.2 Using the Clear Counters Command5.29 NETWORK TOOLS Description 5.29.1 Built-in Commandscommand SyntaxExample 1 - Other 2 - Invalid entry cannot ping device, timed out, etcOptions Options bridge ENABLE/DISABLE IFNUM/ALLSyntax DescriptionNot Applicable set or delete the default IP route to a manageddefroute interface number IP address device through the speciﬁed interfaceExample SyntaxDescription OptionsOptions Syntaxresetreset resetExample SyntaxDescription OptionsExample SyntaxDescription OptionsOptions Syntaxtelnet IP address Port # DescriptionDescription 5.29.2 Special Commandslinktrap SyntaxA.3 ENVIRONMENTAL REQUIREMENTS APPENDIX A SPECIFICATIONSA.1 DEVICE SPECIFICATIONS A.2 PHYSICAL PROPERTIESA.5 COM PORT PINOUT ASSIGNMENTS A.4 INPUT/OUTPUT PORTSElectromagnetic Compatibility EMC A.6 REGULATORY COMPLIANCESafety 6H122-08 User’s Guide Appendix A SpeciﬁcationsB.1 FE-100TX APPENDIX B FE-100TX, FE-100FX AND FE-100F3 SPECIFICATIONS6H122-08 User’s Guide B.2 FE-100FXAppendix B FE-100TX, FE-100FX and FE-100F3 Speciﬁcations FE-100F3 B.3 FE-100F3FE-100F3 6H122-08 User’s Guide6H122-08 User’s Guide Appendix B FE-100TX, FE-100FX and FE-100F3 SpeciﬁcationsC.1 REQUIRED TOOLS APPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGSC.2 SETTING THE MODE SWITCH Switch deﬁnitions and positions are as follows Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on the next power up. ALL user entered parameters, such as IP addresses, subnet masks, SNMP traps, and switching functions are restored to their factory default settings Optional Fast Ethernet Interface Modules Connectors C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULESAppendix C Optional Installations and Mode Switch Bank Settings Figure C-2 6H122-08 Fast Ethernet Interface Module Connector LocationTo install a Fast Ethernet Interface Module in port slot 7 or 8 of the 2. Remove the screw from the rear standoff. Save the screw 7. Installation is complete 6H122-08 User’s Guide Appendix C Optional Installations and Mode Switch Bank SettingsIndex-1 INDEXNumerics 6H122-08 User’s Guide6H122-08 User’s Guide IndexIndex-2 Index-3 Index6H122-08 User’s Guide 6H122-08 User’s Guide IndexIndex-4