9031754 E5 DEC-Specific Applications
5-3
DecGigaApp
GigaSwitch ARP
In addition to these configuration settings, three buttons provid e acc es s to
tables detailing information on the boards within the GigaSwitch, the
hardware and firmware specifications for the GigaSwitch, and the
information on the GigaSwitch’s power supply.
This table provides information on individual boards in the GigaSwitch.
Information is categorize d by I nd e x, Type, St atus, Hardware Revision, a nd
Firmware Revision. Double-clicking on an entry will access the Board Table
View. The Board Table View allows the user to choose the status of a
particular board. The following choices are available: NotPresent,
PowerDown, PowerUp, PowerDownThen Up, Fault, RevMismatch, and
SelfTestInProgress.
This table allows the user to choose to Heed or Ignore the temperature
warning, should the GigaSwitch overheat as well as detailing information on
the GigaSwitch hardware a nd f i rm w are.
This table shows the Status, Input Source, and Output info rmation for the left
and right power supply sources.
GigaSwitch ARP
ARP Agent
The user can specify whether the ARP Agent is on or off.
Timeout
The user can specify the timeout setting in seconds.
Period Between
The interval, measured in seconds, between the ARP Agent trying to resolve
an IP and MAC address.
Retries
The user can specify the number of times the ARP agent will try t o reconcile
an IP and MAC address.
The GigaSwitch ARP table details the IF Index, Unicast Rec eive,
Broadcast Receive, Replies trns, Frame s Flood, and Frames Discarded
information for the GigaSwitch ARP.
Boards
PSC Controller
Power Supply