Cabletron Systems ESX-1320 manual Simplex or Full Duplex Mode Operation

Simplex or Full Duplex Mode Operation

To set a port for full duplex operation using MIB Navigator, proceed as follows:

1.Access Local Management as described in the ESX-1320/ESX-1380 Local Management Guide.

2.Select MIB Navigator via the Local Management Main Menu screen. The MIBNav ->prompt appears.

3.Enter the following commands (shown in bold type) at the MIBNav ->prompt as shown below:

MIBNav -> ctron

MIBNav ->cd 4/3/3/2/1/1 MIBNav ->set 5[x] y

where x equals the port number (1 through 12)

where y can equal either 2 for simplex mode or 3 for full duplex mode. For example: set 5[3] 3 would set port 3 for full duplex operation.

For more information concerning MIB Navigator, refer to the ESX-1320/ESX-1380 Local Management Guide.

ESX-1320/ESX-1380 Installation Guide 2-3