Setting Mode Switches
3.Use a Phillips screwdriver to remove the screws attaching the cover to the ESX chassis. (See Figure
Chassis Cover
Chassis
Cover Screw
Figure 3-3 Removing the Chassis Cover
4.Remove the cover by sliding it backwards and lifting it up from the chassis.
To reinstall the chassis cover, perform the removal procedures in reverse order.
3.3SETTING MODE SWITCHES
Never adjust switch settings while the ESX has power applied to it. Not only is this dangerous, but the change in position activates the switch function only after reinstalling or cycling power to the ESX.
Figure 3-4 shows the location and positions of the mode switches. These switches are shipped in the positions shown and need not be checked before operating the ESX.
|
