Cabletron Systems ESXMIM-F2 manual Chapter Bridge Setup Screen

CHAPTER 8

THE BRIDGE SETUP SCREEN

This chapter explains how to use the Bridge Setup screen to select a Spanning Tree protocol and enable/disable bridge ports. Figure 8-1 shows the Bridge Setup screen.

Event Message Line
ESXMIM Local Management	Flash Image Version: XX.XX.XX
	BRIDGE SETUP

SPANNING TREE PROTOCOL:

[IEEE 802.1]

BRIDGE PORT ADMIN STATUS:	PORT XX --> ALL PORTS	[ENABLED]
BRIDGE PORT PAIR ADMIN STATUS:	PORT XX --> PORT [YY]	[ENABLED]

SAVE [BRIDGE_PORT XX] RETURN

12

Figure 8-1 The Bridge Setup Screen

ESXMIM/ESXMIM-F2 Local Management Guide Page 8-1