Cabletron Systems ESXMIM-F2 manual Management Terminal Setup Requirements

Chapter 2: Local Management Requirements

2.2MANAGEMENT TERMINAL SETUP REQUIREMENTS

Table 2-1 lists the setup parameters for the management terminal. If the management terminal is a Digital Equipment Corporation VT320 or VT220 terminal, press F3 to access the Setup Directory. If the management terminal uses terminal emulation of the VT320, refer to the equipment user manual for setup procedures.

Table 2-1 Terminal Setup Parameters

Menu	Function	Selection
Display Setup	Columns	80 Columns
	Controls	Interpret Controls
	Auto Wrap	No Auto Wrap
	Test Cursor	Cursor
General Setup	Mode	7 Bit Control
	Cursor Keys	Normal Cursor Keys
Communications	Transmit	Transmit = 9600
Setup	Receive	Receive = Transmit
	XOFF	any option
	Bits, Parity	8 Bits, No Parity
	Stop Bit	1 Stop Bit
	Local Echo	No Local Echo
	Port	DEC-423, Data Leads
		Only
	Transmit	any option
	Auto Answerback	No Auto Answerback
Keyboard Setup	Auto Repeat	any option
	Keyclick	any option
	Margin Bell	Margin Bell
	Warning Bell	Warning Bell
	Auto Answerback	No Auto Answerback

Page 2-2 ESXMIM/ESXMIM-F2 Local Management Guide