CHAPTER 6
THE SNMP TRAPS SCREEN
This chapter explains how to configure the SNMP Traps screen to allow the ESXMIM to send traps to as many as eight remote management workstations. SNMP traps are messages about network events and device operational statistics. The following sections explain SNMP Trap screen fields and instructions for configuring them. Figure
Event Message Line |
|
| |
ESXMIM Local Management |
| Flash Image Version: XX.XX.XX | |
|
| SNMP TRAPS |
|
Trap Destination | Trap Community Name | Enable Traps | |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
0.0.0.0 |
| public | [NO] |
SAVE | RETURN |
10
Figure 6-1 The SNMP Traps Screen
6.1TRAP TABLE SCREEN FIELDS
The following definitions explain each of the SNMP Traps screen fields:
Trap Destination
Use this field to enter the IP address of the management workstation designated to receive SNMP traps from the ESXMIM.
| Page |
