Setting HTTP Server, Video Server, and Audio Server (Server)

● Be sure to use a microphone and speaker with amp (→dStart Guide P.3-6).

Note ● If you uncheck the Disable Echo Canceller box, audio quality or volume may be affected. Check or uncheck this option according to the environment and usage of

the camera, as required.

●When transmitting audio, read the “Usage Notice of Audio” carefully (→ P.ii).

You must set the following settings in advance to transmit and receive audio.

●Check the Enable Audio Transmission box and Enable Audio Reception box on the Audio Server section of the Server settings page (→ P.1-13).

●Check the Send and receive audio box in the Connection Setting dialog when starting the NC Viewer (→ P.3-5, 3-23).

●When starting the NC Viewer from the VBAdmin Tools, check the Send and receive audio option on the Connection Settings tab in the Setup properties dialog (→ P.3-

31).

1-14