
NC Viewer Operation
NC Viewer’s Display Screen
The NC Viewer’s display screen has the following buttons, boxes, etc.
1 2 3 4 5 6 7 8
9
10
11
12
13
14
18 | 17 | 16 | 15 |
1Pause/Resume button
Pauses video. Click this button again resumes video.
2External Device Input button
Display the external device input status. Only the administrator can use this button.
3External Device Output button
Operate the external device output. Only the administrator can use this button.
4Cameral Control button
Sets camera properties (e.g., camera angle).
5Control for Administrators button
Sets the exposure and Night Mode of the camera. Only the administrator can use this button.
6Shade Correction button
Sets the shade correction. Only the administrator can use this button.
7Audio button
Sets audio reception. You need to set audio settings in advance to display this button (→
8Microphone button (For the administrator)
Sets audio transmission. Only the administrator can use this button. You need to set audio settings in advance to display this button (→
9Camera List box
Allows selecting from multiple cameras installed.
0Administrator display
When you connect to the
Viewer NC Viewer and Switcher