Log Messages
The VB-C300 Log Messages
The log messages are classified into the following five categories.
Classification | Level | Error level |
crit | Error | A critical failure at software level (task stops). |
|
|
|
err | Error | A failure affecting camera operation (task continues). |
|
|
|
warning | Warning | A failure not affecting the camera operation. |
notice | Warning | A failure external to the system. |
|
|
|
info | Information | Information concerning normal operation. |
■Camera Messages
●A001 Camera start failure (crit)
Message | no %1 installed |
%1 | sources protocols |
Explanation | Camera failed to capture images or initialize the protocol and could not start. |
|
|
Countermeasure | Reboot the camera. If the problem persists, it is a camera failure. Call for service. |
|
|
●A002 Protocol initialization failure (err)
Message | %1 protocol not installed |
|
|
%1 | Protocol type (LS/H) |
|
|
Explanation | The camera failed to initialize the WebView. Configuration data may be destroyed. |
Countermeasure | Restore the factory default settings or press the Reset switch. |
|
|
●A011 Camera control device error (warning)
Message | %1 malfunction (%2) |
%1 | Camera type (Canon |
%2 | Error (read write timeout ...) |
|
|
Explanation | An I/O error for the camera control device has occurred. |
Countermeasure | If the problem persists, it is a camera failure. Call for service. |
|
|
●A012 WebView Livescope client start and stop (info)
Message | %1@%2 %3 |
|
|
%1 | Client type (LS/H) |
|
|
%2 | Client host IP address |
%3 | connected closed |
|
|
Explanation | The HTTP WebView client (LS/H) has started or stopped. |
|
|
●A016 Video data transmission quantity (info)
Message | %1@%2 %3 frames / %4 bytes in %5 seconds |
%1 | Client type (LS/H) |
|
|
%2 | Client host IP address |
%3 | Number of frames |
%4 | Number of bytes |
|
|
%5 | Video transmission period |
Explanation | This message indicates the results of video transmission to the client. |
|
|