Panorama Creation Tool

Capturing Panorama Image

To Capture...

1.Click “Capture” to start capturing.

Change the AE lock position as required.

Check the Indoor Dome Housing (VB-RD41S) option if you are using the optional indoor dome housing.

To stop capturing while it is in progress, click the Stop button.

2.After capturing is completed, click “OK” to accept the image.

To capture the picture again, click “Recapture”. Or, a square section in the displayed grid can be captured again by double-clicking on that section.

To change the AE lock position, click “Cancel” to discard the captured image and return to the initial screen.

If you are using the optional indoor dome housing, select Indoor Dome Housing (VB-

Note RD41S) option so that the area obstructed by the dome housing is not recorded (→dStart Guide P.1-9).

2-6