Preset Setting Tool
■Changing Settings from NC Viewer’s Camera Angle
Start up the NC Viewer and set the camera angle as a preset.
To Make Settings...
1.Select a preset to set from the Preset Selection box and enter the preset name.
2. Click “NC Viewer” to start the NC Viewer.
3.Click “Start Control” to get the camera control.
4.Operate the camera and click “Get Value” at the desired position.
The values retrieved using “Get Value” can be checked in the Preset settings input boxes, or with the Preset Preview frame.
At this point, you can also enter and set values in the camera parameters.
5.Click “Apply”.
Check the Status List to be sure the values were applied correctly. Then when “Save Preset Settings” is clicked, the values will be saved to the
Tools VBAdmin