Overview of NC Viewer Operation

Receiving Audio

You can connect a microphone with amp to the camera and then receive audio from the camera.

 

 

To Make Settings...

 

 

 

 

 

1.

Click “Audio” on the toolbar.

 

 

 

 

2.

The Audio dialog is displayed.

 

 

 

 

 

 

1 Receive audio data

 

 

 

1

 

 

You can receive audio from the microphone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with amp connected to the VB-C300 by

 

 

 

2

 

 

 

 

 

selecting “Receive audio data”.

 

 

 

3

 

 

 

 

 

 

2Volume Slider

Adjust the PC’s speaker volume

3Mute

Selecting “Mute” turns the sound off.

Transmitting Audio (Administrator Only)

You can connect a microphone to the PC and speaker with amp to the camera and then transmit audio from the VB-C300 to the NC Viewer. Perform settings for an administrator to send audio to the VB-C300. Only the administrator can use this function (→ P.3-29).

Tip

You must set the following settings in advance to transmit and recieve audio.

● Check the Enable Audio Transmission box and Enable Audio Reception box on the Audio Server section of on the Server settings page (→ P.1-13).

●Check the Send and receive audio box in the Connection Setting dialog when starting the NC Viewer (→ P.3-5, 3-23).

●When starting the NC Viewer from the VBAdmin Tools, check the Send and receive audio option on the Connection Settings tab in the Setup properties dialog (→ P.3-

31).

3-16