Operating and Setting Camera as Administrator

Setup Properties

Configuring Connection Settings

You can configure audio settings as well as automatic reconnection when the camera and NC Viewer are disconnected due to a network trouble or other reasons.

To make settings ...

1.Choose “Setup Properties” from the Administrator menu bar.

2.Set audio connection and automatic reconnection under “Connection Settings”.

1Send and receive audio

Check this option to transmit and receive

 

 

1

 

 

 

 

 

audio. You need other settings to transmit

 

 

 

or receive audio (P.1-14).

 

 

 

2 Reconnect automatically

 

 

2

 

 

 

 

Check this option to automatically reconnects to the camera.

By checking the Reconnect automatically option, you can automatically reconnect to the camera when you are disconnected from it due to a network trouble or camera reboot. If reconnection fails, it will be retried again in 30 seconds.

Click “OK” when finished.

The audio connection is not reestablished even if the Reconnect automatically option Note is checked. You need to reestablish the audio connection from the NC Viewer.

3. When the message “Try new property setting. OK ?” appears, click “OK”.

Viewer NC Viewer and Switcher

3-31